Netafim Hanging Assembly for Sprinklers, Misters or Foggers - 18in

Adjustable Overhead Hanging Drop for Irrigation Heads, 18in

Mounting a sprinkler, mister, or fogger head directly on rigid pipe leaves no room to adjust hang height as bench crops grow or a layout changes, and it transmits every bump or line movement straight to the head. Netafim's hanging assembly suspends the head on a flexible drop instead, so growers can set hang height to match crop stage and absorb minor line movement without stressing the fitting.

At 18in, this drop suits standard bench heights where a moderate drop clears young to mid-stage canopy.

Key Features & Benefits

• 18in flexible drop — positions the head at the right hang height for the crop stage and bench setup being irrigated.
• Suspension mount — absorbs minor line movement instead of transmitting stress directly to a rigidly piped head.
• Adjustable hang height — lets growers reposition the head as canopy height changes through a growing cycle.
• Compatible with sprinkler, mister & fogger heads — works across Netafim's overhead irrigation head lines using the same drop hardware.

Who Should Use This

This assembly fits greenhouse and nursery growers hanging sprinkler, mister, or fogger heads over benches or beds where hang height needs to change as crops grow or as bench layouts are reconfigured between cycles.

About Netafim

Netafim is an Israeli irrigation company credited with commercializing drip irrigation, and its hanging assembly line is built to support its overhead sprinkler, mister, and fogger product families in greenhouse and nursery installations.

Frequently Asked Questions

What is a hanging assembly used for

It suspends a sprinkler, mister, or fogger head from an overhead structure on a flexible drop, letting growers set hang height to match crop stage rather than mounting the head rigidly on pipe. This also absorbs minor line movement instead of transmitting it directly to the head.

Can I adjust the hang height after installation

Yes, the flexible drop allows height to be adjusted as needed, which is useful as crops grow taller through a cycle or when a bench layout changes between crops. Simply reposition the head along the drop rather than replacing any hardware.

What heads does this hanging assembly work with

It's built to support Netafim's sprinkler, mister, and fogger heads in overhead greenhouse and nursery installations, matching the fitting configuration those product lines use. A single drop length can be reused across head types as a layout changes.

When should I choose the 18in length over a different one

The 18in drop is sized for standard bench heights where a moderate drop clears young to mid-stage canopy. Netafim offers this hanging assembly in multiple lengths from 12in to 48in so growers can match drop length to their specific mounting height and crop canopy.