Bowsmith NonStop Non Clog Dripper Emitter - 0.6 GPH - Green - 1000 Count

Steady 0.6 GPH Drip Delivery That Resists Clogging - 1000 Emitters

Clogged emitters leave plants under-watered and cost you labor to find and clear them. This dripper uses a series of orifices in a silicone diaphragm, so the flow path works to clear obstructions as they pass. That self-cleaning action means less maintenance and less reliance on very fine filtration.

This unit holds a large quantity of emitters. It suits commercial operations and large installations that need many drip points, and growers who want to stock spares for repairs and expansion.

Key Features & Benefits

• 0.6 GPH flow rate — gives a consistent, low-volume drip at each plant.
• Self-cleaning flow path — a series of orifices in a silicone diaphragm enlarge momentarily to pass obstructions.
• Tolerates suspended solids — works with a recommended minimum of 30-mesh filtration rather than very fine screens.
• Green colour — helps you identify this flow rate at a glance.
• 1000 pieces per pack — covers large layouts from a single order.

Who Should Use Bowsmith NonStop Non Clog Dripper Emitter

Commercial growers, nursery operators and serious home gardeners who run drip irrigation or hydroponic water delivery and want fewer clogging problems will benefit most.

About Bowsmith NonStop Non Clog Dripper Emitter

Bowsmith describes its NonStop emitter as using a Pressure Cascade Principle, in which the pressure difference between inlet and outlet is divided across each orifice in the flow path. If an orifice is obstructed, the pressure drop across it rises and the orifice enlarges until the obstruction passes. This model delivers 0.6 GPH, is green, and comes as 1000 pieces per pack.

Frequently Asked Questions

Q: Do I still need a filter?
A: Yes. Bowsmith recommends 30-mesh filtration as a minimum. The design avoids the need for very fine-mesh screens, but basic filtration is still advised.

Q: How does the emitter resist clogging?
A: Water passes through a series of orifices in a silicone diaphragm. If one orifice is obstructed, the pressure drop across it increases and the orifice enlarges until the obstruction passes.

Q: What does 0.6 GPH mean?
A: GPH stands for gallons per hour. Each emitter is rated to deliver 0.6 gallons per hour at the drip point.

Q: How many emitters come in one unit?
A: One unit holds 1000 pieces. It is sold as a single pack.

Q: Is this suitable for small setups?
A: It works at any scale, but the quantity is aimed at large installations. A small grower may keep the rest as spares for future expansion.

Q: What does the green colour indicate?
A: The green colour is the colour of this 0.6 GPH model. It lets you tell it apart from other emitters in your system.