API 3/4-in MPT x 16mm Compression Fitting
City: US, Tewksbury
- Competitive Price Matching
- Fast & Discreet Shipping (2-3 days)
- Safe & Secure Shopping
- High Quality Trusted Brands
Connect Threaded Ports to 16mm Tubing - 3/4-in Male Thread
Mixing threaded hardware with flexible tubing often leaves you hunting for an adapter that fits both. This compression fitting solves that: one end threads into a 3/4-in female port, and the other grips 16mm tubing. It gives you a direct transition for drip irrigation and hydroponic water lines.
Sold as a single fitting, it suits home growers adding or adjusting a line, and commercial growers who need replacement or spare adapters for irrigation runs.
Key Features & Benefits
- 3/4-in male pipe thread — threads into matching female ports on manifolds, tanks and valves.
- 16mm compression end — connects to 16mm tubing without glue.
- Adapter design — moves between rigid threaded parts and flexible line in one piece.
- Sold each — buy only the number you need.
Who Should Use API 3/4-in MPT x 16mm Compression Fitting
Use it if you run drip irrigation or a hydroponic system with 16mm tubing and need to connect to a 3/4-in threaded female port.
About API 3/4-in MPT x 16mm Compression Fitting
This is a drip irrigation adapter with a 3/4-in male pipe thread on one end and a 16mm compression connection on the other. It is listed under the manufacturer part number 72010236 and sold each.
Frequently Asked Questions
Q: What does MPT mean?
A: MPT stands for male pipe thread. The threads are on the outside of the fitting, so it screws into a female port of the same size.
Q: What tubing does it fit?
A: The compression end is made for 16mm tubing. Check your tubing's outside diameter before ordering.
Q: How do I seal the threaded end?
A: Most growers wrap the male threads with thread seal tape before threading them into the port. Tighten by hand first, then snug carefully to avoid over-tightening.
Q: Is it sold as a pack?
A: No. The listing is for one fitting, sold each.
Q: Why use a compression fitting instead of a barbed one?
A: Compression fittings grip the tubing mechanically and can usually be taken apart and reused. Barbed fittings rely on friction and are often harder to remove.
No reviews found
