Raindrip Drip-A-Long Drip Watering Hose - 1/4in x 50ft

Raindrip Drip-A-Long Drip Watering Hose - 1/4in x 50ft

The Raindrip Drip-A-Long Drip Watering Hose simplifies drip irrigation installation by putting everything in a single 50-foot run. Built-in turbulent flow drippers spaced every 12 inches deliver a consistent 1/2 gallon per hour each - providing even, precise water distribution directly at the root zone. The self-cleaning polyethylene tubing works equally well on the surface or buried in the ground in any weather.

Key Features & Benefits

• Built-in drippers every 12 inches: Eliminates the need to punch and insert individual emitters - drippers are pre-installed at uniform 12-inch spacing along the full 50-foot length.
• 1/2 GPH turbulent flow emitters: Non-pressure-compensating turbulent flow design delivers consistent 0.5 gallon per hour at each dripper for even watering across the run.
• Self-cleaning design: Turbulent flow path helps flush sediment and debris from emitters, reducing clogging and maintenance requirements.
• Durable polyethylene construction: UV-resistant tubing withstands outdoor conditions whether left on the surface or buried underground.
• Flexible installation: Can be buried below the soil surface for a clean look or left on the surface and covered with mulch - performs reliably in any weather.
• 1/4in x 50ft run: Standard sizing for easy integration with existing drip irrigation systems, timers, and mainline tubing.

Who Should Use This

The Raindrip Drip-A-Long is ideal for gardeners and growers who want the water efficiency of drip irrigation without the complexity of inserting individual emitters. It is a great solution for row crops, raised beds, container gardens, and greenhouse floor irrigation where evenly spaced, low-volume watering is the goal.

Compatibility

Standard 1/4in tubing compatible with most drip irrigation systems, timers, and 1/4in barbed fittings. Connects to 1/2in mainline tubing via standard 1/4in barbed tee or elbow fittings. Not pressure-compensating - performs best at recommended operating pressures for drip systems (typically 15-25 PSI with a pressure regulator).

Frequently Asked Questions

What does "turbulent flow" mean for drip emitters?

Turbulent flow emitters use a winding internal path that creates turbulent water movement, which helps dislodge sediment particles and prevents clogging. This self-cleaning action reduces maintenance compared to straight-path emitters that can accumulate mineral deposits over time.

Can this hose be buried underground?

Yes. The Raindrip Drip-A-Long is designed to be buried in the soil or left on the surface, and it performs reliably in both configurations across all weather conditions. Burying the hose reduces evaporation and can protect the tubing from UV exposure and physical damage.

Do I need a pressure regulator with this drip hose?

Yes. The turbulent flow emitters are non-pressure-compensating, meaning flow rate varies with pressure. A pressure regulator (typically 15-25 PSI) ensures consistent 1/2 GPH delivery at each dripper. Operating at unregulated household water pressure can result in uneven flow or emitter damage.

How much water does this hose deliver per hour?

Each built-in dripper delivers 0.5 gallons per hour (1/2 GPH) at the rated operating pressure. With drippers every 12 inches across a 50-foot run, there are approximately 50 emitters, delivering a total of approximately 25 gallons per hour at full flow across the entire hose length.