Aeromixer The Hose - 100 ft - 1-in Diameter - Brass End Couplings

Move Feed and Water Faster Through a Pump-Ready Hose - 100 ft Run

Slow, undersized hoses stretch out every feeding and watering round. Aeromixer The Hose uses a 1-in bore with heavy duty brass end couplings, so you can move solution from a sump pump to your plants with less waiting. A double-walled braided nylon build and a 650 PSI bursting pressure rating give the hose a solid margin for pump-driven use.

The 100 ft length suits growers who need to reach across a large room, several tents or a multi-bench hydroponic setup from one pump location. It is sold as a single hose, so you can add more as your layout grows.

Key Features & Benefits

• 1-in hose diameter — carries more volume than a narrow hose, which shortens feeding and watering rounds.
• Heavy duty brass end couplings — give a durable connection point at each end of the run.
• Double-walled braided nylon — adds strength for repeated pump-driven use.
• 650 PSI bursting pressure — leaves a wide margin above typical working pressures.
• Made for Aeromixer and sump pumps — listed as compatible with Aeromixer products and sump pumps.

Who Should Use Aeromixer The Hose

This hose fits indoor growers and commercial cultivation teams who feed or water from a sump pump and need a long, high-flow run. It is a good match for larger rooms and hydroponic systems where moving solution quickly saves labor.

About Aeromixer The Hose

Aeromixer The Hose is a 100 ft, 1-in hose with heavy duty brass end couplings and double-walled braided nylon construction. Its bursting pressure is 650 PSI, and it is listed as compatible with Aeromixer products and sump pumps.

Frequently Asked Questions

Q: Can I connect this hose to a standard home spigot?
A: No. The 1-in hose will not attach to standard home spigots. Plan to use it with a pump or fittings designed for its size.

Q: What is it designed to work with?
A: It is listed as compatible with Aeromixer products and sump pumps. Check your pump's outlet size and fittings before ordering.

Q: What does bursting pressure mean?
A: Bursting pressure is the pressure at which a hose is expected to fail. This hose is rated at 650 PSI, which is well above normal working pressure and gives a safety margin.

Q: Why choose a 1-in hose over a smaller one?
A: A wider bore moves more liquid in the same time, so feeding and watering rounds finish sooner. This matters most on long runs and larger cultivation areas.

Q: What are the end couplings made of?
A: The end couplings are heavy duty brass. Brass is a durable metal for repeated connecting and disconnecting.

Q: How many hoses come in an order?
A: Each order is one 100 ft hose.