Large Electrical Wire Tap - 3.5 x 2.5 x 2.5-in

Branch Off a Main Power Line Without Cutting It - 3.5 in Long

Adding a new circuit to a grow room usually means cutting or splicing a heavy main conductor. A wire tap lets you connect a branch wire to the main line while the main stays in place. This large tap accepts a wide range of heavy-gauge conductors on both sides, and its listed nominal current is 316 amps.

Sold each, this tap suits a hobbyist adding a single branch, an indoor grower expanding a room, or a commercial crew that orders the count each job needs. Its compact body measures 3.5 x 2.5 x 2.5 in and weighs 0.4 lb shipping weight.

Key Features & Benefits

• Wide main-line range — accepts #1 to 300 MCM wire on the main line, so it fits many existing feeds.
• Tap-line range — accepts #1 to 300 MCM on the tap line, giving flexibility for heavy branch runs.
• 316 amp nominal current — a stated rating for high-load distribution.
• Puncture depth of 1.5 - 2.5 mm — a defined range for the piercing contact.
• Compact body — 3.5 x 2.5 x 2.5 in fits in tight enclosures.

Who Should Use Large Electrical Wire Tap

Growers and electricians who need to branch heavy conductors for lighting, climate control or pump circuits. Installation should follow local electrical code and be done by a qualified person.

About Large Electrical Wire Tap

This is a large electrical wire tap, product code 789002, sold each. It measures 3.5 x 2.5 x 2.5 in and ships at 0.4 lb. Wire size ranges and current rating are listed in the specifications.

Frequently Asked Questions

Q: What does a wire tap do?
A: A wire tap connects a branch wire to a main conductor without cutting the main. This keeps the main line continuous while adding a new circuit.

Q: What is its current rating?
A: The nominal current is listed as 316 amps. Always size the circuit and protection to your load and local code.

Q: What does puncture depth mean?
A: It is how far the piercing contact penetrates the wire insulation to reach the conductor. This tap lists a range of 1.5 - 2.5 mm.

Q: Which wire sizes does it accept?
A: The main line accepts #1 to 300 MCM and the tap line accepts #1 to 300 MCM. Check the conductor sizes in your installation against these ranges before ordering.

Q: How many come in one order?
A: It is sold each, so one unit per quantity ordered. Order the number your project needs.

Q: Is this a substitute for an electrician?
A: No. High-current work should follow local electrical code and be done by a qualified person.