Panda Film Black and White Poly Film Roll - 5.5 mil - 10 ft x 50 ft

Block Light on One Side, Reflect It on the Other - 10 ft x 50 ft Roll

Light leaks and dark walls waste the output of your lamps and disturb plants during dark periods. This poly film has a black side that blocks light and a white side that reflects it back toward the canopy. One 5.5 mil roll lets you build partitions and line walls without buying two materials.

The 10 ft x 50 ft roll suits growers covering several walls or dividing a room into separate zones. It gives enough film for a larger indoor space, and you can cut it down for smaller tents and rooms.

Key Features & Benefits

• Black and white sides — one side helps control light, the other reflects light toward plants.
• 5.5 mil thickness — a heavier film than thin light-duty sheeting.
• Polyethylene construction — wipes clean and resists moisture.
• Weather resistant — suits use in greenhouses and similar spaces.
• 10 ft x 50 ft roll — cuts to fit walls, partitions and tent linings.

Who Should Use Panda Film Black and White Poly Film Roll

Home gardeners lining a tent, and commercial growers building partitions or reflective walls in grow rooms and greenhouses, will find this roll useful. It suits anyone who needs light control and reflectivity from one covering.

About Panda Film Black and White Poly Film Roll

This Panda Film roll is a commercial grade polyethylene film with a black side and a white side. It is waterproof and weather resistant, measures 10 ft x 50 ft and is 5.5 mil thick. It is sold as a single roll.

Frequently Asked Questions

Q: Which side faces the plants?
A: Face the white side toward the plants so it reflects light back to them. The black side faces away to block light from passing through.

Q: What does 5.5 mil mean?
A: A mil is one thousandth of an inch, so this film is 5.5 thousandths of an inch thick. A higher mil number means a heavier, more durable film.

Q: Is it waterproof?
A: Yes, the film is waterproof and wipes clean. That makes it practical for humid grow rooms and tents.

Q: How do I cut and hang it?
A: Measure the wall or partition, then cut the film with sharp scissors or a utility knife. Secure it with tape, clips or fasteners suited to your surface.

Q: Can I use it in a greenhouse?
A: Yes, it is weather resistant and can build reflective walls or dark partitions. Check that it suits your setup before covering anything exposed to heat.