Jaderloon Inflation Blower Mounting Bracket | For 60CFM Blower

Mount a 60 CFM Blower on a Double Poly Structure

Swapping out a worn inflation blower mount, or adding a new blower to a double poly greenhouse, usually means matching the bracket to the exact blower size, since a loose or mismatched mount can let the blower vibrate or misdirect airflow. This bracket is sized for a 60 CFM inflation blower and includes an integrated deflector that helps route airflow evenly into the gap between the two layers of poly film.

The blower itself is sold separately, so this bracket works either as a straightforward replacement for a cracked or worn mount or as the mounting hardware for a new 60 CFM blower being added to a double poly system.

Key Features & Benefits

• Sized for 60 CFM Blowers — matches the airflow rating growers commonly use for double poly inflation.
• Integrated Deflector — helps direct air evenly into the space between the two poly layers.
• Compact Mounting Footprint — fits onto standard double poly greenhouse framing.
• Simple Replacement Part — swaps in for a worn or cracked mounting bracket without extra fabrication.

Who Should Use this Mounting Bracket

This bracket fits greenhouse operators running a double poly inflation system who need to mount a 60 CFM blower for the first time, or replace a mount that has cracked or worn out on an existing system.

About Jaderloon Double Poly Inflation Systems

Double poly inflation systems use a small blower, held in place by a mounting bracket, to keep a cushion of air between two layers of greenhouse film. The mount has to match the blower's airflow rating and hold it firmly enough that the deflector keeps directing air into the gap between layers rather than letting the blower shift out of position.

Frequently Asked Questions

Does this bracket include the blower itself?

No, the blower is sold separately. This listing covers the mounting bracket and integrated deflector only.

What blower size is this bracket built for?

It's sized specifically for 60 CFM inflation blowers. Using a blower with a different airflow rating can leave the mount loose or the deflector poorly matched to the blower's output.

What does the integrated deflector do?

It helps direct the blower's airflow evenly into the space between the two layers of double poly film. Without even distribution, one section of the structure can end up under-inflated relative to another.

How do I install this as a replacement part on an existing system?

It works as a direct replacement for a mounting bracket that has cracked, warped, or otherwise worn out. Unmount the old bracket and blower, then reinstall using this one in the same location.

Will this fit a single-layer poly greenhouse?

No, it's built for double poly inflation systems, which need a blower to maintain air pressure between two layers of film. A single-layer covering has no air gap for a blower to maintain.