Green-tek DynaGlas Corrugated Polycarbonate Sheet - 4ft x 8ft - Bronze

Green-tek DynaGlas Corrugated Polycarbonate Sheet - 4ft x 8ft - Bronze

Green-tek DynaGlas Corrugated Polycarbonate Sheet is a lightweight, impact-resistant panel designed for greenhouses, storage structures, and utility buildings. Built-in condensate control minimizes dripping while maintaining exceptional clarity in a bronze tint that diffuses harsh direct sunlight. The UV-protected polycarbonate construction is naturally fire retardant and performs reliably from -40°F to 212°F. Easy to install with standard tools and backed by a 10-year warranty against yellowing and condensation loss, DynaGlas provides reliable long-term performance for a wide range of covered structure applications.

Key Features & Benefits

• Corrugated profile: Structural corrugation provides rigidity and load resistance without the weight of flat sheets - ideal for greenhouse side walls, roof panels, and utility structure cladding.
• Built-in condensate control: Anti-drip surface treatment minimizes condensation dripping onto crops and stored materials below.
• UV protected polycarbonate: Factory UV coating prevents yellowing and degradation under continuous solar exposure.
• Naturally fire retardant: Polycarbonate material provides inherent fire resistance for building code compliance in covered structure applications.
• Wide temperature range: Rated for continuous use from -40°F to 212°F - suitable for extreme climate applications.
• 10-year warranty: Backed against yellowing and condensation performance loss for long-term installation confidence.

Who Should Use This

DynaGlas is ideal for growers, builders, and facility managers who need a cost-effective, durable corrugated panel for greenhouse side walls, lean-to structures, storage buildings, and utility enclosures. The bronze tint reduces glare and provides partial shading - making it particularly useful for walls and low-angle panels where direct light management is beneficial.

Compatibility

Compatible with standard corrugated panel installation systems. Use Green-tek Foam Closure Strips at structural connections to fill corrugation gaps and create a weather-resistant seal at ridge and eave connections. Install with standard corrugated panel fasteners and washers appropriate for polycarbonate materials.

Frequently Asked Questions

What does the bronze tint do compared to clear panels?

The bronze tint absorbs and reflects a portion of incoming solar radiation, reducing light transmission and heat gain through the panel compared to clear polycarbonate. This makes bronze panels better suited for walls and areas where full light transmission is not required or where glare and overheating are concerns.

Is polycarbonate truly fire retardant?

Polycarbonate is classified as a self-extinguishing material - it will burn when exposed to direct flame but stops burning when the flame source is removed. This fire retardant characteristic makes it compliant with building codes for many covered structure applications where glass or flammable plastic sheeting would be prohibited.

How do I seal the corrugated edges at ridges and eaves?

Use Green-tek Foam Closure Strips (vertical profile) to fill the corrugation voids at structural connections where the corrugated panel meets ridge caps, eave boards, or purlins. Closure strips create a weather-resistant seal that prevents insects, debris, and wind-driven rain from entering through the corrugation gaps.

What tools are needed to cut DynaGlas panels?

DynaGlas corrugated polycarbonate can be cut with a circular saw fitted with a fine-tooth carbide blade, a jigsaw, or tin snips for short cuts. Score-and-snap cutting is not recommended for corrugated panels. Always wear eye protection when cutting polycarbonate.