VC 100A/ILS 1-5/8" O.D. Shaft Drive Unit - No Control
City: US, Tewksbury
- Competitive Price Matching
- Fast & Discreet Shipping (2-3 days)
- Safe & Secure Shopping
- High Quality Trusted Brands
Motorized Vent Opening for Greenhouse Structures - 1-5/8 in O.D. Shaft
Opening long runs of vent by hand takes time and is easy to forget when conditions change. This gear motor drive unit turns a 1-5/8 in O.D. shaft to raise and lower polycarbonate vents. It produces 500 in-lb (56 Nm) of output torque through a 1900:1 total gear reduction, and it is rated to lift 75 ft of 4 ft polycarbonate roof ridge vent or 125 ft of 4 ft polycarbonate side vent.
Sold as a single unit with no control included, it suits growers who already have a thermostat or controller, or who plan to add one. It fits a single vent run on a hobby greenhouse and also a section of a larger commercial structure.
Key Features & Benefits
- 1/20 HP, 115V, 60Hz motor — runs on standard 115V supply and draws 0.68 amps.
- 1900:1 total gear reduction — final output speeds of 0.85 and 2.5 RPM give slow, controlled vent movement.
- 500 in-lb (56 Nm) output torque — handles the rated vent lengths listed above.
- Ball bearings and copper windings — a durable motor build with Class B insulation.
- TENV enclosure — a totally enclosed, non-ventilated motor housing.
Who Should Use VC 100A/ILS Shaft Drive Unit
Greenhouse operators who need powered vent control on a 1-5/8 in O.D. shaft will find this unit useful, whether they run a single structure or several. It suits anyone who wants to add their own control or replace an existing drive unit.
About VC 100A/ILS Shaft Drive Unit
The VC 100A/ILS is a gear motor drive unit with a 1/20 HP motor, 115V, 60Hz, 0.68 amps, and a total gear reduction of 1900:1. Final output speeds are 0.85 and 2.5 RPM, with 500 in-lb (56 Nm) of output torque. The model number is M-1092, and it is sold without a control.
Frequently Asked Questions
Q: Does this unit include a control?
A: No. It is supplied without a control, so you need to supply your own thermostat or controller to operate it.
Q: What shaft size does it fit?
A: It is designed for a 1-5/8 in O.D. shaft.
Q: How much vent can it lift?
A: It is rated for up to 75 ft of 4 ft polycarbonate roof ridge vent or 125 ft of 4 ft polycarbonate side vent.
Q: What does TENV mean?
A: TENV stands for totally enclosed, non-ventilated. The motor housing is sealed and has no ventilation openings.
Q: What power supply does it need?
A: It runs on 115V at 60Hz and draws 0.68 amps. Have a qualified electrician handle the wiring.
Q: Why are there two output speeds?
A: The gear reducer lists final output speeds of 0.85 and 2.5 RPM. Check with the seller about which applies to your setup before ordering.
No reviews found
