5ft Daisy Chain Cord for ModelOne/ICL LED, #18 AWG

A 5-Foot Link for Wider Driver Spacing

Beyond the required TDC-1 connection to power and the HCS controller, each additional driver within a Model One group links to the next using a short daisy chain cord carrying both power and control signal together. These cords come in a few lengths so growers can match the physical spacing between mounted drivers.

At 5 feet (150cm) long and weighing 0.51 lbs (230g), the TDC-4 is the longest of the three link cords, suited to Model One drivers mounted farther apart.

Key Features & Benefits

• 18 AWG, 10A Rated — supports reliable power and signal transfer between drivers.
• Fixed Link Length — sets the spacing between two adjacent drivers.
• 100-277VAC Input — accepts standard commercial voltage ranges.
• Connects Power and Control Together — carries both between adjacent drivers in one cord.

Who Should Use This Daisy Chain Link Cord

Growers spacing Model One LED drivers within a group who need a link of this specific length are the intended users. Every group of drivers still needs exactly one TDC-1 cable connecting it to power and the HCS controller, regardless of how many of these shorter links it also uses.

About ThinkGrow

ThinkGrow, TrolMaster's lighting brand, offers this driver-to-driver link cord in a few lengths so a Model One installation's physical driver spacing doesn't force excess slack or an overly tight run. Combining power and control signal transfer in one cord keeps a modular lighting build simpler to wire than running each separately.

Frequently Asked Questions

What does this cord connect?

Power and control signal from one LED driver to the next within a Model One group. It links adjacent drivers rather than connecting the group to main power.

How do I choose the right link length?

Match the cord length to the physical spacing between two adjacent drivers in your installation. Shorter lengths suit tightly mounted drivers, while longer ones bridge more distance.

Do I still need a TDC-1 cable?

Yes, each group of drivers also needs one TDC-1 cable plus an EC-120 or EC-240 power cable. This cord only links drivers within that group to each other.

What gauge wire does it use?

18 AWG, rated for 10A. That rating is consistent across all the lengths in this link cord series.

What voltage range is this cord rated for?

100-277VAC. That range matches the rest of ThinkGrow's Model One cabling system.