PHOTOBIO PHOTO LOC 0-10V Control Cable, 8' Trunk + 5' Branch (White)

PHOTO LOC T Cable for One Fixture, 8ft Trunk + 5ft Branch

Branching a single MX, TX, or T fixture into PHOTOBIO's PHOTO LOC Communication Tree calls for a cable that reaches from the tree's main run out to the fixture's own signal port. This T Cable adds an 8-foot trunk line and a 5-foot branch line, connecting one fixture into the tree in a fixed 1:1 ratio.

Its white jacket matches PHOTOBIO's white-cable accessory line, and it daisy-chains on the tree side to a centralized controller, a jumper cable, or an adjacent T Cable.

Key Features & Benefits

• 8-Foot Trunk Plus 5-Foot Branch — sets the spacing from the Communication Tree's main run to an individual fixture.
• 18AWG Wiring — carries DC communications signal reliably over the cable run.
• IP67-Rated Push-Lock Connections — resist dust and water intrusion while linking securely to adjacent cables.
• 1:1 Fixture Ratio — connects exactly one fixture per T Cable, keeping tree wiring predictable as a room scales up.

Who Should Use This T Cable

Growers connecting a single MX, TX, or T fixture into a PHOTO LOC Communication Tree, where the fixture sits a moderate distance from the tree's main run, should use this T Cable.

About PHOTOBIO

PHOTOBIO's PHOTO LOC system carries 0-10V signal between MX, TX, and T fixtures and a centralized controller, running as a Communication Tree alongside the room's AC power wiring. T Cables like this one are the branch connections that tie individual fixtures into that tree.

Frequently Asked Questions

How many fixtures does one T Cable power?

One, in a fixed 1:1 ratio. Each fixture on the Communication Tree needs its own T Cable branching off the trunk run.

How long is the trunk and branch on this cable?

An 8-foot trunk and a 5-foot branch, sized for fixtures set a moderate distance from the tree's main line. Other PHOTO LOC T Cable lengths are available for shorter or longer runs.

What gauge wire does it use?

18AWG, matching the wire gauge used throughout the rest of the PHOTO LOC Communication Tree. This carries the system's 0-10V DC signal reliably over the cable's length.

Is this cable weatherproof?

Yes, it carries an IP67 rating on its push-lock connections, resisting dust and water intrusion in demanding grow room environments. That aligns with the environmental rating of the fixtures it links to.