PHOTOBIO AC Power T Cable, 40A M25 to EN100, 1-T , Ferrite, 4.5'

40A Power T Cable for a Single Fixture, 4.5ft Trunk

PHOTOBIO's AC Power Distribution Tree links multiple lighting fixtures in a grow room through locking M25 connectors, an alternative to running individual NEMA plugs and outlets to every fixture. A Power T cable is the branch connection that ties one fixture into that tree, in a fixed 1:1 ratio.

This Power T cable runs a 4.5-foot trunk line with a 1.5-foot branch, sized for fixtures mounted closer to the tree's main run.

Key Features & Benefits

• M25 Female to EN100 Male Connector — daisy-chains to a Panel Mount pigtail, Power Link cable, or an adjacent Power T cable.
• 10AWG Wiring — rated for the AC Power Distribution Tree's 40A capacity.
• IP67-Rated Construction — resists dust and water intrusion in demanding grow room environments.
• 1:1 Fixture Ratio — connects exactly one fixture per Power T cable, keeping the tree's wiring predictable as a room scales up.

Who Should Use This Power T Cable

Growers building or expanding a PHOTOBIO AC Power Distribution Tree who need to branch a single fixture off the main trunk line should use this Power T cable. It daisy-chains to a Panel Mount pigtail, a Power Link cable, or another Power T cable to keep extending the tree.

About PHOTOBIO

PHOTOBIO's AC Power Distribution Tree is a locking-connector wiring system for grow rooms running many LED fixtures, built to replace a web of individual outlets and extension cords with one branching power run. Power T cables, Power Link cables, and Panel Mount pigtails are the three components that make up that system.

Frequently Asked Questions

How many fixtures does one Power T cable power?

One fixture per cable, in a fixed 1:1 ratio. If you need to power more fixtures, add another Power T cable at the next branch point on the tree.

What connectors does this cable use?

It uses a locking M25 female connector on one end and an EN100 male connector on the other, so it daisy-chains securely to the rest of the AC Power Distribution Tree. Both connector types carry an IP67 rating.

What gauge wire does it use?

10AWG wiring, sized to carry the tree's full 40A capacity without derating. This matches the wire gauge used throughout the rest of the PHOTOBIO Power Distribution Tree system.

Is this cable weatherproof?

Yes, it carries an IP67 rating, so it resists dust and water intrusion in humid grow rooms and greenhouse environments. That matches the environmental rating of the fixtures it connects to.

What else can this cable connect to besides a fixture?

On the tree side, it connects to a Panel Mount pigtail, a Power Link cable, or another Power T cable, letting growers extend the tree as a room adds more fixtures. On the fixture side, it terminates at a single PHOTOBIO fixture's power input.