PHOTOBIO AC Female Panel mount, 40A M25, Pigtail 6" 10AWG

Panel Mount Pigtail, the Tree's Root Connection

Every PHOTOBIO AC Power Distribution Tree needs a single, code-compliant starting point where it ties into a facility's electrical system, rather than a loose bundle of wires at the junction box. This female panel mount pigtail is that starting point, giving a licensed electrician a defined connection to hardwire into a junction box with at least 40A of service.

Its 6-inch, 10AWG lead is pre-stripped and ready for hardwiring, and its locking M25 female connector then becomes the root of the entire tree.

Key Features & Benefits

• 6-Inch, 10AWG Lead — pre-stripped wire ready for hardwiring into the junction box by a licensed electrician.
• Locking M25 Female Connector — provides a secure root connection for Power Link and Power T cables.
• Sealed Against Dust and Moisture — an IP67 rating keeps the root connection protected in humid grow environments.
• Rated to 480V — suited to standard and high-voltage commercial lighting circuits.
• UL Listed — certified for safety in commercial electrical installations.

Who Should Use This Panel Mount Pigtail

Growers and electricians setting up a new AC Power Distribution Tree for PHOTOBIO MX, CX, TX, and T fixtures, or compatible Phantom PHENO LED and PHANTOM DE 60 Series 277-400V HID fixtures, should use this panel mount pigtail as the system's starting point.

About PHOTOBIO

PHOTOBIO's AC Power Distribution Tree begins at a hardwired panel mount pigtail like this one, then extends out through Power Link and Power T cables to power fixtures across a room. The connector system is rated to 480V and UL Listed for commercial electrical installations.

Frequently Asked Questions

How is this pigtail installed?

A licensed electrician hardwires the 6-inch, 10AWG lead into a junction box with at least 40A of service. Once installed, it provides the locking M25 connection point where the rest of the tree begins.

What fixtures is this compatible with?

It works with PHOTOBIO MX, CX, TX, and T LED fixtures, as well as compatible Phantom PHENO LED and PHANTOM DE 60 Series 277-400V HID fixtures. Confirm your specific fixture model supports the AC Power Distribution Tree before planning an install.

What voltage is this rated for?

It is rated to 480V, covering both standard commercial circuits and higher-voltage industrial service. UL Listing confirms it meets recognized safety standards for that voltage range.

Is this pigtail weatherproof?

Yes, its IP67-rated housing seals the connection point against dust and moisture, which matters since this pigtail is typically the tree's only exposed hardwired connection. That protection carries through to the rest of the tree's cabling as well.

What connects to this pigtail?

Power Link cables and Power T cables both connect to its locking M25 female connector, extending the tree out to individual fixtures. This pigtail itself only provides the root connection, not power to a specific fixture.