Fluence PSU2 DC Dimming Signal Cable - 11in - Pigtail to M12 Threaded Connector

Carry the Dimming Signal from a PSU2 to VYPR 3 and RAZRm — 11in M12 Threaded

The Fluence PSU2 DC Dimming Signal Cable is the dedicated 11in link between a PSU2 power supply and VYPR 3 or RAZRm fixtures using the M12 Threaded connector, telling the fixture driver how much to dim. The pigtail end terminates in bare wire leads for connection to the PSU2 wiring harness or junction point.

Built with UL2464 rated wire and compliant with VW-1 flame test standards, the cable is engineered for reliable signal transmission in professional greenhouse and vertical farming environments where accurate light intensity control matters for crop consistency and energy management.

Key Features & Benefits

• Dedicated Dimming Signal Path: Carries the low-voltage control signal from the PSU2 to the VYPR 3 or RAZRm driver for precise, responsive intensity adjustment.
• M12 Threaded Connector: A threaded connector provides a mechanically secure, vibration-resistant fixture-end connection.
• UL2464 Wire Construction: Consistent signal quality and construction standards for professional installations.
• VW-1 Flame Test Compliant: Meets this flame test standard for safety in commercial horticultural environments.
• 11in Length: Matched to common spacing between a PSU2 and fixture in commercial mounting configurations.

Who Should Use This

Greenhouse operators and vertical farm managers running Fluence VYPR 3 or RAZRm fixtures with PSU2 power supplies who want dimming control are the direct fit for this 11in cable, since it is the correct OEM link between the PSU2 signal output and the fixture's dimming input.

About Fluence Bioengineering

Fluence Bioengineering, based in Austin, Texas, builds dimming adapters and control accessories for its commercial LED grow lighting platforms; the company currently operates under Signify, parent of the Philips lighting brand.

Frequently Asked Questions

What does a dimming signal cable do in a Fluence lighting system?

It carries a low-voltage control signal from the power supply to the fixture driver, telling it how much to dim the output. Without this cable connected, fixtures typically run at a fixed output level rather than responding to dimming commands.

How do I know this cable matches my power supply?

This cable is wired specifically for the PSU2 power supply and its M12 Threaded dimming connector. Fluence uses different signal connectors and pinouts across its PSU lineup, so using the wrong cable can cause no dimming response or incorrect behavior.

How is the pigtail end connected?

The pigtail end terminates in bare wire leads that connect to the dimming signal input terminals on the controller, PSU wiring harness, or junction point. Follow Fluence's installation instructions for correct wire identification to avoid miswiring the circuit.

Is 11in enough reach for my installation?

Signal cable length can affect dimming accuracy in some systems, so check that 11in covers the distance between your PSU2 and fixture before ordering. Consult Fluence support for guidance on maximum recommended lengths if you need to extend beyond it.