Fluence DC Extension Cable - 6ft - M19 Push-Lock - 2-Pin Female to 2-Pin Male

6ft DC Power Reach for VYPR 3 and SPYDR 2 — M19 Push-Lock, 2-Pin

This cable stretches the DC power connection between a Fluence power supply and a VYPR 3 or SPYDR 2 fixture by 6ft, terminating in a 2-pin M19 Push-Lock interface sized specifically for those two platforms' 54V DC max, 15A max power draw. Line the two halves up and press — no crimping or extra hardware needed to seat the connection.

Fluence rates this cable to UL 1581 VW-1 for flame safety and certifies it for wet-location installation, so condensation and humidity inside a commercial greenhouse or vertical farm won't compromise the connection over its 5-year warranty period.

Key Features & Benefits

• 2-Pin M19 Push-Lock Fit: Sized for VYPR 3 and SPYDR 2 DC inputs specifically, so there is no guessing about connector compatibility.
• 54V DC / 15A Rating: Matched to the power draw of the VYPR 3 and SPYDR 2 platforms this cable is built for.
• UL 1581 VW-1 Certified: Passes this vertical flame-spread test, a recognized fire-safety benchmark for horticultural wiring.
• Wet-Location Certified: Holds up against the condensation and ambient humidity found in active greenhouse and indoor farm spaces.
• 6ft Reach: Bridges the distance when a power supply sits away from its paired fixture.

Who Should Use This

Anyone deploying VYPR 3 or SPYDR 2 fixtures where the power supply and fixture connection point are 6ft or more apart needs this specific cable, since its 2-pin M19 Push-Lock end and 54V/15A rating are matched to those two platforms and won't fit other Fluence DC connector types.

About Fluence Bioengineering

Based in Austin, Texas, Fluence Bioengineering builds LED fixtures and the dimming and power cabling used to control them in commercial cultivation facilities; Fluence currently operates as part of Signify, the Philips lighting parent.

Frequently Asked Questions

Why does this cable specify VYPR 3 and SPYDR 2 rather than working with any Fluence fixture?

Fluence uses several different DC connector styles across its fixture lineup, and this cable's 2-pin M19 Push-Lock end and 54V/15A rating are built specifically for the VYPR 3 and SPYDR 2 platforms. A fixture using a different connector standard will not accept this cable.

How is this different from a standard AC extension cord?

An AC extension cord runs mains voltage from a wall outlet to the power supply, while this cable runs already-converted, low-voltage DC current onward from the power supply to the fixture itself. They serve different segments of the circuit and are not interchangeable.

Will this cable survive a humid greenhouse environment long-term?

Yes, Fluence certifies it for wet-location use and to the UL 1581 VW-1 flame-safety standard, both aimed at the condensation and moisture load typical of commercial greenhouse and indoor vertical farm settings. This certification is part of what the cable's warranty coverage relies on.

How do I know if my VYPR 3 or SPYDR 2 fixture can accept 54V DC / 15A?

Compare your fixture's power supply specification sheet against this cable's 54V DC max, 15A max rating before ordering. If your configuration or wiring is not clear from the documentation, check with Fluence directly rather than guessing.