Fluence AC Flex Wiring Trunk Extension Cable - 15ft - M25 Push-Lock

Extend a Flex Wiring Trunk Run by 15ft Without Custom Pre-Wiring

The Fluence AC Flex Wiring Trunk Extension Cable adds 15ft to a Flex wiring trunk run using a push-lock M25 connection, cutting down on the custom pre-wiring, conduit installation, and cleanup that traditional hardwired AC power setups require. It is rated for wet locations and compatible with VYPR 3, RAZRm, and SPYDR 2 fixture platforms.

The plug-and-play M25 Push-Lock connector at each end reduces installation labor compared to hardwired infrastructure, while keeping the total connected load on any run within the system's 16A maximum. This cable carries a 1-year limited warranty.

Key Features & Benefits

• Labor-Saving M25 Push-Lock Connector: Plug-and-play connection reduces pre-wiring, installation, and cleanup time compared to hardwired infrastructure.
• Wet-Location Rated: Engineered for the humid, condensation-prone conditions present in commercial greenhouses and indoor vertical farms.
• 16A Maximum Current: Accommodates the power requirements of Flex wiring trunk runs in commercial lighting installations.
• 15ft Extension: Adds reach to a trunk wiring run, providing flexibility in facility layout and fixture positioning.
• Compatible with Current Fluence Platforms: Works with VYPR 3, RAZRm, and SPYDR 2, covering Fluence's primary current fixture lineup.

Who Should Use This

Commercial greenhouse integrators and facility managers using Fluence's AC Flex wiring system with VYPR 3, RAZRm, or SPYDR 2 fixtures who need to extend a trunk run beyond the standard reach are the direct fit for this 15ft cable, particularly in larger facilities where fixture rows exceed standard trunk lengths.

About Fluence Bioengineering

Fluence Bioengineering, an Austin, Texas-based manufacturer, designs LED grow lighting and the trunk wiring accessories used in large commercial installations; the company currently operates under Signify, the Philips lighting parent.

Frequently Asked Questions

What is Fluence's AC Flex wiring system, and how does this cable fit in?

The AC Flex wiring system is a plug-and-play approach to powering Fluence installations that replaces traditional hardwired AC distribution with a pre-engineered M25 push-lock cable system. This trunk extension cable adds length to the main wiring trunk, letting the system reach fixtures further from the power source without custom wiring work.

What is the maximum current this cable supports?

This cable is rated for a maximum of 16A. Ensure the total connected load on any trunk run stays within this limit and within the capacity of the branch circuit powering the system.

How do I know if I need this extension length?

Measure the distance the existing trunk run falls short of reaching your intended fixture positions, and choose the 15ft option if it covers that gap. Consult Fluence's Flex wiring installation guide for proper trunk sizing before ordering.

Is this cable compatible with older Fluence fixture platforms like RAZR 2/3/4 or SPYDR 1?

No, this cable is built for Fluence's current fixture platforms using the M25 Push-Lock Flex wiring system. Older platforms use M19 Threaded connectors on a different wiring infrastructure and are not compatible with this cable.