Fluence AC Extension Cable — 15ft, PTP Pigtails to 3-Pin Female M19 Push-Lock

Extend AC Power to Fluence LED Fixtures with Pass-Through Pigtail Convenience — 15ft, M19 Push-Lock

The Fluence AC Extension Cable provides 15 feet of AC power reach from facility wiring pigtails to Fluence LED fixtures equipped with 3-pin female M19 push-lock AC power inputs. The pass-through pigtail (PTP) design on the input side allows for direct termination to facility branch circuit wiring, while the M19 push-lock output delivers a secure, toolless connection to Fluence fixture power inputs.

This cable bridges the gap between hardwired facility electrical infrastructure and Fluence's push-lock fixture connection system, providing a clean, reliable solution for grow room electrical contractors and facility managers integrating Fluence LED systems into commercial cultivation facilities with hardwired power distribution.

Key Features & Benefits

• 15ft Extension Length: Provides practical reach for connecting facility branch circuit wiring to Fluence fixtures in most commercial grow room overhead installations.
• Pass-Through Pigtail (PTP) Input: Direct termination to facility branch circuit wiring enables integration with hardwired commercial power distribution systems without additional adapters.
• 3-Pin Female M19 Push-Lock Output: Secure push-lock M19 connector delivers a toolless, reliable connection to Fluence LED fixture AC power inputs in M19 push-lock-equipped models.
• Commercial-Grade Construction: Built with heavy-duty conductors and insulation rated for continuous operation in commercial indoor growing environments.
• OEM Fluence Accessory: Designed by Fluence Bioengineering for full compatibility with Fluence LED systems using M19 push-lock AC power connectors.
• Reduces Junction Box Requirements: Combines facility hardwire connection and fixture plug-in in a single cable, simplifying power distribution to Fluence fixtures.

Who Should Use This Extension Cable

Grow room electrical contractors, facility managers, and professional installers connecting Fluence LED fixtures to hardwired commercial branch circuit power distribution systems. Ideal for facilities where Fluence M19 push-lock fixtures need to connect to conduit-run or hardwired facility power without intermediate outlet connections.

Compatibility & Installation

Designed for Fluence LED fixtures equipped with 3-pin female M19 push-lock AC power inputs. The pigtail ends require termination by a licensed electrician to facility branch circuit wiring. Verify voltage and amperage compatibility between the cable, fixture, and facility circuit before installation.

Frequently Asked Questions

What Fluence fixtures use M19 push-lock connectors?

Several Fluence LED systems use M19 push-lock AC connectors. Verify your specific fixture model's power input connector type in Fluence's technical documentation before ordering.

Do I need an electrician to install this cable?

Yes — the pigtail (PTP) end requires termination to facility branch circuit wiring by a licensed electrician. The M19 push-lock end can be connected to the fixture toollessly once facility wiring is complete.

Is this cable suitable for 277V commercial grow room circuits?

Verify the cable's voltage rating in Fluence's technical documentation. Ensure your facility circuit and fixture specifications match the cable's rated voltage and amperage capacity.

Is this an OEM Fluence cable?

Yes — this is a genuine Fluence Bioengineering accessory designed for use with Fluence LED grow lighting systems using M19 push-lock power connectors.