Fluence PSE2 Mounting Bracket - 2pc - 10.5in - SPYDR 2

Mount Your Fluence PSE2 Controller Securely in Any SPYDR 2 Installation

The Fluence PSE2 Mounting Bracket kit provides two 10.5in brackets engineered specifically for securing the PSE2 power supply and controller unit in commercial SPYDR 2 series grow light installations. Designed to integrate with standard grow room racking, ceiling structures, and Fluence mounting hardware, this bracket set ensures the PSE2 is mounted at the correct position relative to the fixture array - keeping connections short, cable management clean, and the controller accessible for monitoring and adjustments.

Key Features & Benefits

• 2-piece bracket set - Includes the pair of mounting brackets required for a complete, stable PSE2 installation, with both support points covered in a single purchase.
• 10.5in bracket length - Sized to position the PSE2 at the correct standoff distance from the mounting surface, providing clearance for ventilation and cable routing around the controller unit.
• Purpose-built for PSE2 and SPYDR 2 - Engineered as an OEM Fluence accessory to provide the correct hole spacing, mounting geometry, and structural compatibility for PSE2 installations in SPYDR 2 series arrays.
• Durable metal construction - Built to withstand the mechanical loads and humid environmental conditions of commercial grow rooms without corrosion or deformation over extended operational periods.

Who Should Use This

Facility installers and grow room operators commissioning Fluence SPYDR 2 systems with PSE2 controllers who need to securely mount the PSE2 unit in an accessible, code-compliant position relative to the fixture array. Also useful for operators relocating or reconfiguring existing SPYDR 2 installations.

Compatibility

Designed for use with the Fluence PSE2 controller in SPYDR 2 series LED grow light installations. Not intended for PSU1, PSU2, PSE1, or other Fluence controller models. Verify PSE2 unit dimensions and mounting hole spacing against the bracket specifications before installation.

Frequently Asked Questions

Do these brackets work with any mounting surface, or only Fluence-specific structures?

The brackets are designed to mount to standard unistrut, ceiling T-bar, or similar structural members common in commercial grow rooms. Verify your mounting surface compatibility and hardware requirements before installation.

Is hardware included for attaching the brackets to the mounting surface?

Mounting hardware for attachment to the facility structure (bolts, clamps, etc.) is typically not included and should be sourced based on your specific mounting surface type. Hardware for attaching the PSE2 unit to the brackets is included.

Can I use these brackets to mount the PSE2 on a vertical surface?

Yes - the bracket design accommodates both horizontal overhead mounting and vertical wall or post mounting, providing flexibility to position the PSE2 controller where it is most accessible and practical for your grow room layout.

How many bracket sets do I need per SPYDR 2 array?

One bracket set (2 brackets) is required per PSE2 unit. A single PSE2 typically controls one SPYDR 2 array zone, so the number of bracket sets needed equals the number of PSE2 units in the installation.