B.Lite Premium Dual CMH Fixture - 1000W - 120V-277V

Dual-Lamp CMH Output With Four Power Settings - 1000W

Running one light for every stage of cultivation usually means overdriving it in vegetative growth or underpowering it in flowering. This B.Lite fixture holds two 500W CMH lamps and offers dimmable settings of 500W, 600W, 800W and 1000W, so you can set output to suit the room. It accepts 120V to 277VAC input, which helps it fit a range of electrical setups.

At 1000W with two lamps, this unit suits regular indoor growers and commercial rooms that want one dimmable fixture covering several stages. It is sold each as a single fixture. Small trial growers can run it at lower settings.

Key Features & Benefits

• Four dimmable settings — step between 500W, 600W, 800W and 1000W as plant needs change.
• Wide input voltage — accepts 120V to 277VAC at 48-63Hz.
• Ignition protection — Smart Start Ignition Control, Soft Start and Hot Lamp Re-Strike are included.
• Full Circuit Protection and RF Shielding — protect the circuit and limit radio interference.
• Vega & Alanod MIRO reflector — directs light from both lamps toward the canopy.

Who Should Use B.Lite 1000W Premium Dual CMH Fixture

Indoor growers and commercial cultivators who want a dimmable dual-lamp fixture and already use, or plan to buy, a B.Lite ballast controller.

About B.Lite Premium Dual CMH Fixture

B.Lite makes this 1000W fixture with two 500W CMH lamps. It lists a power factor of 0.98, THD under 10% and an ignition voltage of 3KV-5KV. It operates at 0 to 35°C and 25-70% relative humidity. The fixture measures 21 x 21 x 31 in and ships at 25 lb. The box includes the fixture, an RJ14 connection kit, a power cable and a specifications manual.

Frequently Asked Questions

Q: Does this fixture include a ballast controller?
A: No. It is compatible with B.Lite ballast controllers, which are not included. Buy the controller separately.

Q: What power settings does it offer?
A: It offers dimmable settings of 500W, 600W, 800W and 1000W. Use lower settings when plants need less light.

Q: What does Hot Lamp Re-Strike mean?
A: It means the fixture can relight a lamp that is still hot after a power interruption. This helps the lamps return to operation.

Q: What voltage does it need?
A: It accepts 120V to 277VAC input at 48-63Hz. Confirm your circuit and wiring with a qualified electrician.

Q: What conditions can it run in?
A: It is rated for 0 to 35°C and 25-70% relative humidity. Keep the room within those limits.

Q: What comes in the box?
A: You get the 1000W CMH fixture, an RJ14 connection kit, a power cable and a specifications manual.