Quest Dehumidifier Return Duct Kit - For Quest Dual 110 & 150

Duct Your Dehumidifier Intake Cleanly - 10-in Collar

Dehumidifiers that pull air straight from the room can miss the zones where humidity builds up. This kit adds a duct plate with collar to the intake of a compatible Quest unit, so you can run ducting to where you want air drawn from. Quest recommends a dedicated duct for each unit and a maximum run of 25 ft to help maintain airflow and performance.

Sold as a single kit, it suits growers who already run a Quest Dual 110 or 150 and want a ducted intake in a grow room, drying space, or other controlled environment, whether a home setup or a commercial facility.

Key Features & Benefits

• Duct plate with collar — gives you a defined connection point for intake ducting.
• Eight T25 Torx screws included — the fasteners come in the kit, so installation needs no separate hardware search.
• Made for Quest Dual 110 and 150 — it is listed for these dehumidifier models.
• Flexible duct configurations — you can adapt the ducting layout to your room.

Who Should Use Quest Return Duct Kit

Growers with a Quest Dual 110 or 150 who want to move the intake away from the unit's location, or connect it to a duct system, will find this kit useful.

About Quest Return Duct Kit

This is a Quest intake duct kit for Quest Dual 110 and 150 dehumidifiers. It contains one 10-in duct plate with collar and eight T25 Torx screws. The recommended maximum duct run is 25 ft.

Frequently Asked Questions

Q: Which dehumidifiers does this kit fit?
A: It is listed for Quest Dual 110 and Quest Dual 150 dehumidifiers. Check your model before ordering.

Q: What is included?
A: The kit includes one 10-in duct plate with collar and eight T25 Torx screws. Ducting itself is not listed as included.

Q: How long can the duct run be?
A: Quest recommends a maximum duct run of 25 ft. Staying within that length helps maintain proper airflow and performance.

Q: Can one duct serve several units?
A: Quest recommends dedicated ducting for each unit. Giving each dehumidifier its own duct supports consistent airflow.

Q: What tool do I need to install it?
A: The screws are T25 Torx, so you need a T25 Torx driver.