Anden Hanging Kit for Models A70 & A95(F)

Ceiling Hanging Kit for the Anden A70 and A95(F) Dehumidifiers

Floor space in a grow room is usually worth more than ceiling space, and a dehumidifier sitting on the floor takes up room that could otherwise hold canopy, benching, or foot traffic. Anden's hanging kits let a dehumidifier mount from the ceiling instead, freeing up the floor footprint the unit would otherwise occupy.

The 5660 hanging kit fits the Anden A70 and A95(F) dehumidifiers, giving growers running either of those smaller capacity tiers a way to reclaim the floor space the unit would otherwise occupy.

Key Features & Benefits

• 400 lb Safe Working Load — Rated to support the matching dehumidifier's weight with margin.
• 14-Gauge Zinc-Plated Steel Bars — Suspension bars resist corrosion in humid grow room conditions.
• 10-Foot Cables with Cripple Clamps — Cables set the mounting height and lock in place with cripple clamps.
• Neoprene Vibration Isolation Pads — ¼-inch pads reduce vibration transfer to the mounting structure.
• Model-Specific Fit — Sized specifically for the Anden A70 and A95(F) dehumidifier's mounting brackets.

Who Needs a Hanging Kit

A hanging kit is for growers who want to reclaim floor space by mounting a dehumidifier overhead instead of setting it on the ground or on casters. It suits grow rooms and greenhouses with adequate ceiling structure to support the load safely — verify the mounting structure can carry the kit's rated safe working load before installing.

What's Included in an Anden Hanging Kit

Anden's hanging kits include 14-gauge zinc-plated steel suspension bars, 10-foot cables with cripple clamps, 3.5-inch bolts, ¼-inch neoprene vibration isolation pads, washers, hex nuts, and a gripple key. The neoprene pads reduce vibration transfer to the mounting structure, which matters for both structural longevity and noise control in an occupied grow space.

Frequently Asked Questions

What models does the 5660 hanging kit fit?

The Anden 5660 is designed for the A70 and A95(F) dehumidifier models. It shares the same 400 lb safe working load rating as the 5691 kit built for the larger A130(F).

What is the safe working load of these hanging kits?

Both the 5660 and 5691 hanging kits carry a 400 lb safe working load rating. Confirm your ceiling or structural mounting point can support that load, including the weight of the dehumidifier itself, before installing.

How do I install the hanging kit?

Attach the suspension bars to your structural mounting points, then run the 10-foot cables down to the dehumidifier's mounting brackets using the included cripple clamps to set the height. The neoprene vibration isolation pads go between the bars and the dehumidifier to reduce vibration transfer.

What hardware is included in the kit?

Each kit includes 14-gauge zinc-plated steel suspension bars, 10-foot cables with cripple clamps, 3.5-inch bolts, ¼-inch neoprene vibration isolation pads, washers, hex nuts, and a gripple key. That's everything needed to hang the matching dehumidifier model without sourcing separate mounting hardware.

When should I use a hanging kit instead of casters?

Use a hanging kit when floor space is at a premium and your ceiling structure can support the unit's weight, freeing the footprint the dehumidifier would otherwise take up. Casters make more sense when you need to reposition the unit on the ground periodically instead of mounting it permanently overhead.