Anden Hanging Kit for Model A130(F)

Hanging Kit for Anden Model A130 Dehumidifier

The Anden Model 5691 Hanging Kit suspends Anden A130 industrial dehumidifiers from overhead structural supports. The A130 is a larger, heavier unit than the A70 — the 5691 kit is specifically designed to handle the A130's footprint and weight distribution, unlike the 5660 kit which is sized for the smaller A70 and A95.

Rated at 400 pounds safe working load, the 5691 provides a significant safety margin over the A130's operating weight. Suspension bars are 14-gauge zinc-plated steel. The included ¼-inch neoprene vibration isolation pads reduce vibration transmission from the running A130 to the overhead structure. All hardware required for installation is included.

Key Features & Benefits

• 400 lb Safe Working Load — Rated for up to 400 lb — provides safety margin for the A130's operating weight.
• Sized for the A130 — Specifically designed for the Anden Model A130(F) — not interchangeable with the 5660 kit.
• 14-Gauge Zinc-Plated Steel Bars — Heavy-duty corrosion-resistant suspension bars for structural hanging.
• 10-Foot Cables with Cripple Clamps — Adjustable cable length for installation at the appropriate hanging height.
• ¼-Inch Neoprene Vibration Pads — Absorbs compressor and fan vibration before it reaches the hanging structure.
• Complete Hardware Included — Bars, cables, clamps, 3.5-inch bolts, washers, hex nuts, and gripple key.

Who Should Use This Kit

The Anden 5691 kit is the correct hanging solution for Model A130(F) installations where overhead mounting is preferred or required. Use the 5691 (not the 5660) specifically for A130 dehumidifiers — each kit is sized for its respective model.

Why Use the Model-Specific Hanging Kit

Anden offers separate hanging kits for different dehumidifier models because unit dimensions, weight distribution, and structural requirements vary between models. Using the kit designed for a specific unit ensures the suspension bars, cable spacing, and hardware are matched to that unit's footprint and load characteristics. Using a kit designed for a different model may result in improper load distribution or structural fit.

Frequently Asked Questions

What models is the 5691 kit compatible with?

The Anden 5691 Hanging Kit is designed for Anden model A130(F) industrial dehumidifiers.

Is the 5691 interchangeable with the 5660?

No. The 5660 is designed for A70 and A95 models, while the 5691 is designed for the A130. They are not interchangeable.

What is the safe working load?

The 5691 has a safe working load of up to 400 pounds.

What hardware is included?

The kit includes 14-gauge zinc-plated steel bars, 10-foot cables with cripple clamps, 3.5-inch bolts, ¼-inch neoprene vibration pads, washers, hex nuts, and a gripple key.