Anden 5940 Remote Mount Kit for AS150

Remote Fan Pack Mounting Kit for AS150 Installations Without Top Clearance

Not every mechanical room has the ceiling or equipment clearance to mount the AS150's fan pack directly on top of the unit, and forcing a top-mount installation where it doesn't fit isn't an option. The Anden 5940 kit solves that by letting the fan pack mount remotely in the grow space instead, connected back to the AS150 by hose and tubing.

The 5940 includes the steam hose, condensate trap, and drain tubing needed to run the fan pack at a separate location from the AS150 unit itself, giving installers flexibility when the mechanical room layout doesn't allow a direct top-mount.

Key Features & Benefits

• Remote Fan Pack Mounting — Lets the fan pack install in the grow space rather than directly on top of the AS150.
• Steam Hose Included — Carries steam from the AS150 unit to the remotely mounted fan pack.
• Condensate Trap Included — Manages condensate generated along the remote steam run.
• Drain Tubing Included — Completes the plumbing needed for a remote fan pack installation.
• Solves Clearance Constraints — Fits mechanical room layouts where direct top-mounting isn't physically possible.

When You Need This Kit

This kit is for AS150 installations where the mechanical room or equipment layout doesn't leave enough clearance to mount the fan pack directly on top of the unit. If your installation has that clearance, a direct top-mount doesn't require this kit at all.

Remote vs. Direct Fan Pack Mounting on the AS150

The AS150 ships with its fan pack built in as standard equipment, designed to mount directly on top of the unit in a typical installation. The 5940 kit is the accessory that breaks that connection apart, routing steam through a hose to a fan pack mounted separately in the grow space when the mechanical room layout requires it.

Frequently Asked Questions

When do I need the 5940 remote mount kit?

Use the 5940 when your mechanical room or installation layout doesn't have the clearance to mount the AS150's fan pack directly on top of the unit. It's an accessory for a specific installation constraint, not a required component for every AS150 setup.

What's included in the kit?

The kit includes the steam hose, condensate trap, and drain tubing needed to run the fan pack remotely from the AS150 unit. That covers the plumbing side of a remote installation.

Does the AS150 include a fan pack already?

Yes, the AS150 ships with a built-in fan pack designed for direct top-mounting. The 5940 kit is only needed when that direct mount isn't physically possible in your installation.

How far can the fan pack be mounted from the AS150 unit?

The kit's steam hose and drain tubing set the practical distance for a remote installation; check Anden's installation documentation for the specific maximum run length supported. Follow the manufacturer's guidance rather than exceeding the rated hose length.

Does installing this kit require a professional installer?

Yes, since the AS150 itself requires professional HVAC installation, a remote fan pack installation using the 5940 kit should be handled by the same licensed installer rather than as a separate DIY step. Routing the steam hose and drain tubing correctly affects both performance and safety, so it isn't a job to split off from the rest of the AS150 installation.