Anden 5770 Replacement filter for Anden Dehumidifier Model A95F

MERV 11 Replacement Filter for the Anden A95F Dehumidifier

The Anden 5770 is the model-specific MERV 11 replacement filter for the Anden A95F movable dehumidifier. Its dual-layer synthetic media keeps filtration performance consistent while protecting the unit's internal components from dust and airborne particles.

The 5770 measures 12 x 12 x 1 inch and ships as a single filter, sized to drop directly into the A95F's filter access panel with no trimming or fitting required.

Key Features & Benefits

• MERV 11 Efficiency — Captures a high percentage of particles in the 1-10 micron range for equipment protection.
• Dual-Layer Synthetic Media — Upstream E-Layer (electrostatic) and downstream M-Layer (mechanical) work together for filtration.
• E-Layer Electrostatic Enhancement — The electrostatically charged upstream layer captures smaller particles that mechanical filtration alone would miss.
• Pre-Assembled Design — Arrives ready to install — no assembly, cutting, or reinforcements needed.
• Easy Access Installation — Anden dehumidifiers use an easy-access filter panel for quick swaps.
• 12 x 12 x 1 Inch — Sized specifically for the Anden A95F dehumidifier's filter slot.

Who Should Use This Filter

The Anden 5770 is the correct replacement filter for any Anden Model A95F dehumidifier. Replace it on a regular schedule to maintain filtration efficiency and protect the dehumidifier's internal components. Operations running an A95F continuously in a high-particle environment, such as an active grow room, may need to replace it more often than a light-duty schedule calls for.

MERV 11 Filtration and Anden's Dual-Layer Design

Anden's dehumidifier replacement filters use a dual-layer, 100% synthetic media design. The upstream E-Layer is electrostatically enhanced, attracting and capturing smaller airborne particles beyond what simple mechanical interception can catch, while the downstream M-Layer captures larger particles by physical interception. Together, the two layers reach a MERV 11 rating — a finer level of filtration than the washable MERV 8 filter media used standard across Anden's smaller dehumidifier tiers — while still maintaining adequate airflow through the unit.

Frequently Asked Questions

What models does the 5770 fit?

The Anden 5770 is designed specifically for the Anden Model A95F movable dehumidifier. It is not interchangeable with filters sized for the fixed A95 or other Anden capacity tiers.

What does MERV 11 mean?

MERV (Minimum Efficiency Reporting Value) 11 means the filter captures a high percentage of particles in the 1-10 micron size range. That's a meaningfully finer level of filtration than a MERV 8 washable filter while still allowing enough airflow through the dehumidifier to maintain its rated performance.

How often should this filter be replaced?

Replace the 5770 filter when it shows visible debris buildup or reduced airflow through the dehumidifier, or follow Anden's recommended schedule for your specific model and operating environment. Operations running dehumidifiers continuously in high-particle environments, such as active grow spaces, typically need to replace filters more often than a light-duty schedule calls for.

Is this filter pre-assembled?

Yes, this filter arrives fully assembled and ready to install, so no cutting, framing, or reinforcement is needed before it goes into the unit. Just remove the old filter through the access panel and slide the new one into place.

What are the filter dimensions?

The 5770 measures 12 x 12 x 1 inch and ships as a single filter. That square profile is specific to the A95F and won't fit Anden's other dehumidifier models.