Anden 5701 Replacement Filter for Anden Dehumidifier Model A130

MERV 11 Replacement Filter for the Anden A130 Dehumidifier

The Anden 5701 is the model-specific MERV 11 replacement filter for the Anden A130 industrial dehumidifier. It's built with dual-layer 100% synthetic media, maintaining the unit's air filtration performance and protecting internal components from dust and airborne particles.

The 5701 measures 14 x 19 x 1 inch and ships as a single filter, sized to drop directly into the A130's filter access panel with no trimming or fitting required.

Key Features & Benefits

• MERV 11 Efficiency — Captures a high percentage of particles in the 1-10 micron range for equipment protection.
• Dual-Layer Synthetic Media — Upstream E-Layer (electrostatic) and downstream M-Layer (mechanical) work together for filtration.
• E-Layer Electrostatic Enhancement — The electrostatically charged upstream layer captures smaller particles that mechanical filtration alone would miss.
• Pre-Assembled Design — Arrives ready to install — no assembly, cutting, or reinforcements needed.
• Easy Access Installation — Anden dehumidifiers use an easy-access filter panel for quick swaps.
• 14 x 19 x 1 Inch — Sized specifically for the Anden A130 dehumidifier's filter slot.

Who Should Use This Filter

The Anden 5701 is the correct replacement filter for any Anden Model A130 dehumidifier. Replace it on a regular schedule to maintain filtration efficiency and protect the dehumidifier's internal components. Operations running an A130 continuously in a high-particle environment, such as an active grow room, may need to replace it more often than a light-duty schedule calls for.

MERV 11 Filtration and Anden's Dual-Layer Design

Anden's dehumidifier replacement filters use a dual-layer, 100% synthetic media design. The upstream E-Layer is electrostatically enhanced, attracting and capturing smaller airborne particles beyond what simple mechanical interception can catch, while the downstream M-Layer captures larger particles by physical interception. Together, the two layers reach a MERV 11 rating — a finer level of filtration than the washable MERV 8 filter media used standard across Anden's smaller dehumidifier tiers — while still maintaining adequate airflow through the unit.

Frequently Asked Questions

What models does the 5701 fit?

The Anden 5701 is designed specifically for the Anden Model A130 industrial dehumidifier. It is not interchangeable with filters sized for other Anden capacity tiers.

What does MERV 11 mean?

MERV (Minimum Efficiency Reporting Value) 11 means the filter captures a high percentage of particles in the 1-10 micron size range. That's a meaningfully finer level of filtration than a MERV 8 washable filter while still allowing enough airflow through the dehumidifier to maintain its rated performance.

How often should this filter be replaced?

Replace the 5701 filter when it shows visible debris buildup or reduced airflow through the dehumidifier, or follow Anden's recommended schedule for your specific model and operating environment. Operations running dehumidifiers continuously in high-particle environments, such as active grow spaces, typically need to replace filters more often than a light-duty schedule calls for.

Is this filter pre-assembled?

Yes, this filter arrives fully assembled and ready to install, so no cutting, framing, or reinforcement is needed before it goes into the unit. Just remove the old filter through the access panel and slide the new one into place.

What are the filter dimensions?

The 5701 measures 14 x 19 x 1 inch and ships as a single filter. That size is specific to the A130 and won't fit smaller or larger Anden dehumidifier models.