F5 Fans Industrial Inline Fan - 12-in - 2320 CFM - 120V - Built-In 3-Speed Controller

Adjustable High-Volume Ventilation - 3 Speed Settings

Heat and stale air build up fast in an enclosed cultivation space, and a weak fan leaves you chasing temperature and humidity. The F5 Fans Industrial Inline Fan moves up to 2320 CFM on its high setting, and its built-in 3-position speed controller lets you step down to 1755 or 1432 CFM when you need less airflow. The fan arrives pre-wired, with its mounting bracket already attached.

This is a single fan sold each, with a 12-in duct size. It suits regular indoor growers and commercial rooms that need strong exhaust or intake airflow, and it is a good match for rooms that also run a carbon filter on the intake side.

Key Features & Benefits

• Three-position speed controller — set airflow, wattage and amperage with a turn of the dial.
• 2320 / 1755 / 1432 CFM — choose full airflow or a lower setting for a smaller space.
• 12 ft pre-wired power cord — plug into a 120V outlet without wiring the fan yourself.
• Preinstalled heavy-duty mounting bracket — hang the fan faster.
• Flexible duct fit — the intake takes 12-in or 14-in ducting, and the exhaust takes 12-in ducting.

Who Should Use F5 Fans Industrial Inline Fan

Growers who ventilate a tent or room, pull air through a carbon filter, or need adjustable airflow across vegetative growth and flowering will find this fan useful. It also suits commercial operators who want a single-unit fan with a simple speed control.

About F5 Fans Industrial Inline Fan

F5 Fans lists this inline fan under model 951012. It runs on 120V at 60 Hz and draws 550, 460 or 415 W depending on the speed setting. Static pressure is rated at 1.80, 1.60 and 1.50 in/WG across the three settings. It measures 21.5 x 19 x 23 in and ships at 53 lb.

Frequently Asked Questions

Q: What duct sizes does this fan fit?
A: The intake side accepts 12-in or 14-in ducting. The exhaust side fits 12-in ducting.

Q: How do I change the airflow?
A: Turn the dial on the built-in 3-position speed controller. The fan moves 2320, 1755 or 1432 CFM depending on the setting.

Q: What does static pressure mean?
A: Static pressure is the resistance the fan can push air against, such as ducting bends or a carbon filter. It is measured here in in/WG, with ratings of 1.80, 1.60 and 1.50 across the three settings.

Q: Do I need to wire it?
A: No. The fan comes with a 12 ft pre-wired power cord for a 120V outlet.

Q: Does it come with a mounting bracket?
A: Yes. A heavy-duty mounting bracket is preinstalled.

Q: How much power does it draw?
A: Input power is 550, 460 or 415 W, and amperage is 4.66, 4.17 or 4.11 A, from high to low setting.