Water Detector + Touch Spot for watering confirmation

Confirm Every Irrigation Event Actually Happened

An irrigation solenoid that opens on schedule doesn't guarantee water actually reached its target, whether from a clogged line or a failed valve. The TrolMaster WD-1 water detector can catch that gap directly, assigned to a specific solenoid or pump output so the system expects water to arrive within an adjustable delay every time that output activates.

It also doubles as a simple standalone leak detector when it isn't tied to a specific irrigation output, and up to 25 WD-1 units can connect to a single Hydro-X or Aqua-X system for monitoring several points at once.

Key Features & Benefits

• Irrigation Confirmation Mode — verifies water arrives within an adjustable delay after an output activates.
• Stand-Alone Leak Detection — works as a simple leak detector without being tied to an output.
• Up to 25 Units Per System — monitors multiple irrigation points from one controller.
• Includes Touch Spot and Stab Holder — provides flexible placement at the monitoring location.

Who Should Use the WD-1

Growers who want confirmation that irrigation water actually reached its target, and anyone who wants an early warning for leaks near sensitive equipment, are both well served by the WD-1. Its dual-purpose design covers either use case without needing two different products.

About TrolMaster

The WD-1 pairs irrigation confirmation with leak detection in one device, engineered at TrolMaster's Sacramento, California headquarters so growers don't need separate hardware for each function. Supporting up to 25 units on one system lets a larger operation monitor several irrigation points and leak-prone spots simultaneously.

Frequently Asked Questions

How many WD-1 units can I connect?

Up to 25 WD-1 units on a single Hydro-X or Aqua-X system. That's enough to cover multiple irrigation points or leak-prone areas at once.

What happens if water isn't detected after irrigation?

The system sends an irrigation failure alert once the adjustable delay time passes. That alert flags a possible clog, closed valve, or other irrigation failure.

Can the WD-1 just monitor for leaks?

Yes, it works as a stand-alone leak detector without being assigned to a specific output. That mode suits monitoring near sensitive equipment rather than confirming irrigation.

What's included with the WD-1?

A water detector, a touch spot, a stab holder, an RJ12 T-splitter, and a 16 ft RJ12 cable. That covers a standard single-point installation.