TrolMaster DCC-2 Dual System Control Adapter - 6.14 x 3.27 x 1.18-in

Let Two Controllers Share One Device - 6.14 in Long

Some equipment needs to answer to more than one control system. The DCC-2 connects two controllers to a single plug-in module, so one device can respond to both. For example, an exhaust fan assigned to climate control can also be addressed to a second system for emergency exhaust. An LED indicator shows the adapter's status.

This single adapter suits growers who already run TrolMaster plug-in modules and want a second controller to share a device, from a small indoor room to a larger facility.

Key Features & Benefits

• Dual controller connection — lets two controllers address the same device.
• Built-in RJ12 cable — connects directly to the plug-in module with no separate cable.
• LED indicator — gives a visual status check.
• Compact body — measures 6.14 x 3.27 x 1.18 in and weighs 0.24 lb.
• Low electrical draw — 12VAC input with a maximum current of 0.2A.

Who Should Use TrolMaster DCC-2

Growers who control fans or other equipment through TrolMaster plug-in modules and need a second controller to share that equipment will get the most from it.

About TrolMaster DCC-2

The TrolMaster DCC-2 Dual System Control Adapter works with the DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1 and DSV-1 plug-in modules. It operates in ambient temperatures of 32-122°F (0-50°C) and relative humidity up to 90%. It carries a 3-year warranty through the distributor.

Frequently Asked Questions

Q: What does the DCC-2 do?
A: It connects two controllers to one plug-in module. Both controllers can then address the device attached to that module.

Q: Which modules does it work with?
A: It is designed for the DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1 and DSV-1 plug-in modules. Check your module model before ordering.

Q: Do I need a separate cable?
A: No. The RJ12 cable is built into the DCC-2, and it plugs into the module directly.

Q: What conditions can it operate in?
A: Ambient temperature should stay between 32 and 122°F (0-50°C). Relative humidity should be 90% or less.

Q: What power does it need?
A: It uses a 12VAC input with a maximum current of 0.2A.