LTL Controls ELEMENT1 Analog Atmosphere Control - 4 Outlets

One Controller for Climate, CO2 and Night Cycles - 4 Outlets

Keeping temperature and humidity steady usually means juggling separate timers and controllers. The ELEMENT1 puts a cooling device, a humidifier or dehumidifier, a daytime device and a nighttime device on one analog unit. Its solid-state temperature and humidity sensor is designed to resist interference from electronic and digital ballasts.

This single unit suits hobbyists setting up one room and small commercial rooms that need straightforward, dependable environment control without a software-based system. Growers running several rooms would buy one controller per room.

Key Features & Benefits

• 4 controlled outlets — run a cooling device, a humidifier or dehumidifier, a CO2 device and a nighttime device from one place.
• Solid-state temperature and humidity sensor — reads the growing area conditions that drive the outlets.
• EMI/EFI resistance — the sensor is designed to resist interference from electronic and digital ballasts.
• 3 operating modes — choose the way the controller works to match your setup.
• UL/CE listed components — built with listed parts for long service.

Who Should Use LTL Controls ELEMENT1

Choose it if you want to manage cooling, humidity, CO2 timing and a night-only device in one grow room with an analog interface. It fits indoor cultivation spaces and hydroponic setups of modest complexity.

About LTL Controls ELEMENT1

The ELEMENT1 is an analog atmosphere control from LTL Controls with 4 outlets. It measures 12 x 9 x 7 in and ships at 4.8 lb. It is sold each.

Frequently Asked Questions

Q: What can I plug into the four outlets?
A: One cooling device such as a fan or AC, one humidifier or dehumidifier, one CO2 device, and one nighttime device. The humidifier outlet handles one or the other, not both.

Q: When does the CO2 outlet run?
A: It powers on only during the daytime. You can use it for any device that should run only in the day.

Q: When does the nighttime outlet run?
A: It powers on only at night, so it suits any device you want active only during the dark period.

Q: Will electronic ballasts interfere with it?
A: The sensor is designed to resist EMI and EFI from electronic and digital ballasts. This helps keep readings dependable near lighting equipment.

Q: What does solid-state sensor mean?
A: A solid-state sensor measures temperature and humidity electronically, with no moving parts. That is the sensing method this controller uses.

Q: How big is it?
A: The unit measures 12 in long, 9 in wide and 7 in high. Shipping weight is 4.8 lb.