Anden Digital Dehumidifier Control (For All Anden Dehumidifiers)

Digital Dehumidifier Control Unit for All Anden Models

The Anden Model A76 Digital Dehumidifier Control allows operators to monitor and control an Anden dehumidifier from a remote location. The A76 uses an onboard sensor to monitor relative humidity at the location where it is mounted, and displays the current RH reading on a digital display. The operator sets a target RH setpoint through the A76, and the connected dehumidifier operates to maintain that level.

The A76 is a hardwired control unit that connects directly to the Anden dehumidifier. This makes it suited for installations where the dehumidifier is located in an area that is difficult to access — such as above a drop ceiling, inside a mechanical room, or in a tight crawlspace — while the A76 is mounted in a more convenient working location for easy monitoring and adjustment.

Key Features & Benefits

• Remote RH Monitoring — Onboard sensor measures RH at the A76's mounting location and displays on the digital display.
• Remote Setpoint Control — Allows the operator to set and adjust the target RH without accessing the dehumidifier directly.
• Hardwired Connection — Direct hardwired connection to the dehumidifier for reliable communication and control.
• Canopy-Height Monitoring — Mount the A76 at canopy level in the grow space for humidity measurement where it matters most.
• Compatible with All Anden Dehumidifiers — Works with all Anden industrial dehumidifier models.
• Digital Display — Clear digital display shows current measured RH at the sensor location.

Who Should Use This Control

The A76 is suited for any Anden dehumidifier installation where the unit is not easily accessible for regular monitoring and adjustment, or where monitoring humidity at a specific location (such as plant canopy height) is more useful than measuring at the dehumidifier itself. Grow operations with dehumidifiers mounted above the canopy or in utility areas will find the A76 practical for everyday humidity management.

Measuring Humidity at Canopy Height

Humidity at the plant canopy is often different from humidity at the dehumidifier itself, particularly in sealed or semi-sealed grow rooms with active air movement. Mounting the A76 at canopy height allows the dehumidifier to respond to the humidity level where plants are actually growing, rather than the humidity level at the dehumidifier's inlet. This can improve humidity control accuracy during critical growth stages.

Frequently Asked Questions

Does the A76 work with all Anden dehumidifiers?

Yes. The Anden A76 Digital Dehumidifier Control is compatible with all Anden industrial dehumidifier models.

Is the A76 wireless or hardwired?

The A76 is a hardwired control unit that connects directly to the Anden dehumidifier via a wired connection.

Where should the A76 be mounted?

Mount the A76 at a convenient location for daily monitoring and adjustment — ideally at canopy height in the grow space, or in a working area near the grow room if the dehumidifier is in an inaccessible location.

Can the A76 control the dehumidifier's RH setpoint?

Yes. The A76 allows the operator to set the target RH level. The connected dehumidifier will operate to maintain that setpoint based on the A76's sensor reading.