Quest 205 High Efficiency Overhead Dehumidifier - 200 Pints/Day - 575 CFM - 120V

Pull Moisture From Large Grow Rooms - 200 Pints/Day Capacity

Excess humidity in a flowering or vegetative room invites mold, slows transpiration and strains your climate controls. The Quest 205 is an overhead dehumidifier rated at 200 pints per day with 575 CFM of airflow, so it handles the moisture load of a serious indoor space. It draws 10 amps on a 120V single phase supply.

This unit suits regular indoor growers and commercial rooms that need steady moisture removal without moving to a higher-voltage system. At 130 lb, it is built for permanent installation rather than frequent relocation.

Key Features & Benefits

• 200 pints/day removal capacity — keeps humidity in check across a large cultivation room.
• 575 CFM airflow — circulates room air through the coil.
• MERV 13 filter, 18 x 18 x 2 in — captures fine airborne particles before they reach the coil.
• 3/4 in threaded NPT drain port — connects to a hard-plumbed drain line.
• 5-year warranty — protects a long-term equipment investment.

Who Should Use Quest 205

Choose it if you run an indoor, greenhouse or hydroponic room and need dependable humidity control on a standard 120V circuit. It also fits commercial operators who want a ceiling-mounted unit that leaves floor space free.

About Quest 205

The Quest 205 is a Quest overhead dehumidifier using R-454B refrigerant. It draws 10 A at 60 Hz, includes a 9 ft NEMA 5-15P power cord, and measures 26.8 x 23.6 x 20.9 in. Its listed certifications are UL Rated, ETL Listed and CSA.

Frequently Asked Questions

Q: What power does the Quest 205 need?
A: It runs on 110-120 VAC, single phase, 60 Hz, and draws 10 amps. It ships with a 9 ft NEMA 5-15P power cord.

Q: What temperature range can it operate in?
A: It is rated for operating temperatures from 56 to 95 °F. Check your room conditions against this range before installing.

Q: How does the water drain?
A: The unit has a 3/4 in threaded NPT drain port. You can connect a drain line to carry collected water away.

Q: What does MERV 13 mean?
A: MERV is a rating scale for how well an air filter captures airborne particles. A higher number means finer filtration, and this unit's filter is rated MERV 13.

Q: How heavy and large is it?
A: It ships at 130 lb and measures 26.8 x 23.6 x 20.9 in. Plan for solid mounting and help during installation.

Q: What does the warranty cover?
A: The unit carries a 5-year warranty. Review the manual for the full terms.