Quest Dehumidifier Hang Kit | For Quest 5 Series Dehumidifiers

Overhead Hang Kit for Quest 5 Series Dehumidifiers

A Quest Dehumidifier Hang Kit mounts a compatible unit overhead instead of leaving it on the floor, which frees up usable floor space in a grow room and gets the unit up out of the way of any flooding or standing water at ground level. The kit includes everything needed to suspend the unit from a ceiling or structural support.

This kit is sized for Quest 5 Series dehumidifiers, giving installers a rated overhead mounting option instead of floor placement.

Key Features & Benefits

• Four adjustable ratchet straps — let installers level the unit and fine-tune its hanging height after the initial mount.
• Four eyebolts and two hanging brackets — provide the structural attachment points between the dehumidifier and the ratchet straps.
• Up to 150 lb working load — rated to support the compatible dehumidifier's weight with a safety margin built into the rated capacity.
• Frees up floor space — getting the unit overhead clears floor area for racking, walkways, or other equipment in a space-constrained grow room.
• Flood protection — mounting overhead keeps the dehumidifier's electronics and motor out of harm's way if the floor level experiences standing water.

Who Should Use This

This kit is for growers and facility installers who want a compatible Quest dehumidifier mounted overhead rather than sitting on the floor, whether the goal is reclaiming floor space, protecting the unit from flooding, or both.

About Quest

Quest is a Therma-Stor brand. It focuses on commercial dehumidification. Therma-Stor is headquartered in Madison, Wisconsin. It's the same parent company behind the Anden brand. Therma-Stor has built dehumidifiers and environmental-control equipment for decades. Quest specifically targets commercial and industrial moisture control. Think indoor cultivation, food production, and commercial buildings. That's a different focus than residential basement units. Many overhead models use the company's patented M-CoRR design. M-CoRR stands for multi-coil refrigeration. The design recycles heat pulled from the air. That happens during dehumidification itself. It improves energy efficiency as a result. It also cuts heat sent back into the room.

Frequently Asked Questions

What's included in the Hang Kit?

The kit includes four adjustable ratchet straps, four eyebolts, two hanging brackets, and an installation guide. It provides everything needed to suspend the compatible dehumidifier overhead, aside from whatever structural anchor point the straps connect to.

What's the maximum weight this kit supports?

The kit is rated for up to 150 lb of working load. Confirm the specific dehumidifier's actual weight against this rating, and inspect your ceiling or structural support to make sure it can bear that load plus a reasonable safety margin.

Which Quest dehumidifiers is this Hang Kit designed for?

This kit is designed for Quest 5 Series dehumidifiers. Confirm your exact model against the current compatibility list before ordering, since bracket spacing and strap length are matched to specific unit dimensions.

When does overhead mounting make more sense than leaving the unit on the floor?

Overhead mounting frees up floor space for racking, walkways, or other equipment, which matters most in space-constrained grow rooms. It also keeps the unit's electronics and motor above any standing water that might occur at floor level during a flooding event.