Anden Hanging Kit for A70 & A100 Dehumidifiers — 400lb Capacity 14ga Zinc Steel

400lb-Rated Overhead Mounting for Anden A70 & A100 Dehumidifiers, 29.13in L x 18in W

Suspending a dehumidifier overhead frees up floor space, but only if the mounting hardware is actually rated for the unit's weight and built to isolate vibration from the ceiling structure. This Anden hanging kit is sized for A70 & A100 dehumidifiers, built from 14-gauge zinc-plated steel suspension bars rated to a 400-pound safe working load, with everything needed for a complete overhead install in one package.

The kit includes 10-foot cables with cripple clamps, neoprene vibration isolation pads, flat washers, hex nuts, and a gripple key, so there is no separate hardware to source before mounting the unit.

Key Features & Benefits

• 400lb safe working load — rated capacity for the dehumidifier models this kit is sized for.
• 14-gauge zinc-plated steel — suspension bars built for long-term overhead structural loading.
• Neoprene vibration isolation pads — reduce vibration transfer into the ceiling or support structure.
• Complete hardware set — 10ft cables, cripple clamps, washers, hex nuts, and a gripple key included.
• Sized for A70 & A100 — suspension bar dimensions (29.13in L x 18in W) matched to the dehumidifier chassis.

Who Should Use This Hanging Kit

Growers installing an Anden A70 & A100 dehumidifier overhead to free up floor space, rather than running it freestanding, need this kit for a properly rated and vibration-isolated mount.

About Anden

Anden engineers its dehumidifiers and mounting accessories together under Therma-Stor LLC in Madison, Wisconsin, with roughly 80 years of environmental-control manufacturing behind the brand, so hanging kits like this one are matched to specific chassis weights rather than sold as generic hardware.

Frequently Asked Questions

Which Anden dehumidifiers does this kit fit?

This kit is sized for Anden A70 & A100 dehumidifiers, with suspension bars measuring 29.13in L x 18in W. Confirm your model before ordering, since Anden hanging kits are matched to specific chassis dimensions and weights.

What is included in the kit?

It includes zinc-plated steel suspension bars, 10-foot cables with cripple clamps, neoprene vibration isolation pads, flat washers, hex nuts, and a gripple key. That covers the hardware needed for a complete overhead install without sourcing separate parts.

How much weight can this kit support?

The kit carries a 400-pound safe working load rating. That rating applies to the kit as installed per the manufacturer's instructions, so follow the included hardware and mounting guidance rather than substituting other cabling.

Why use vibration isolation pads on an overhead mount?

The neoprene pads reduce how much operating vibration transfers from the dehumidifier into the ceiling or support structure. That matters most in finished spaces or shared structures where transmitted vibration and noise are a concern.