Anden A710V1 Industrial Dehumidifier with VLGR Technology — 710 Pints/Day 240V

710 Pints/Day with Variable-Speed VLGR Technology on 240V, A710V1

Running a fixed-speed dehumidifier at full output around the clock wastes energy during the hours when the room does not actually need that much moisture removal. The Anden A710V1 uses patented VLGR (Variable Speed Low Grain Refrigerant) Technology to dynamically adjust compressor and fan speed to real-time environmental demand, removing up to 710 pints of moisture per day at up to 1,760 CFM on 240V power while drawing less power when conditions allow.

That variable-speed operation delivers a 3.0 L/kWh energy factor, the highest in the Anden dehumidifier lineup, which matters most during late flowering when transpiration rates fluctuate significantly as plants mature.

Key Features & Benefits

• VLGR variable-speed technology — adjusts compressor and fan speed to real-time load instead of running at fixed output.
• 710 Pints/Day at up to 1,760 CFM — capacity and airflow sized for the largest single-room grow facilities.
• 3.0 L/kWh energy factor — the highest energy factor in the Anden dehumidifier lineup, from adjusting output to actual demand.
• Model A77 remote controller included — canopy-level monitoring and diagnostics from a wall-mounted location.
• Overflow protection and MERV 11 filtration — standard commercial-grade safeguards, with a 5-year warranty.

Who Should Use the A710V1

Facilities running the largest single-room grow operations, generating moisture loads that exceed what a fixed-speed 320-pint unit can efficiently handle, are the direct fit for the A710V1 and its variable-speed capacity.

About Anden

Anden engineers its industrial dehumidifier line, including VLGR variable-speed technology, specifically for large-scale cultivation under Therma-Stor LLC in Madison, Wisconsin, drawing on roughly 80 years of environmental-control manufacturing experience.

Frequently Asked Questions

What does VLGR technology actually do?

VLGR (Variable Speed Low Grain Refrigerant) Technology adjusts the A710V1's compressor and fan speed based on real-time environmental demand. That means it draws less power when the room needs less dehumidification instead of running at maximum output continuously.

How much moisture can this unit remove?

The A710V1 removes up to 710 pints of moisture per day at up to 1,760 CFM on 240V power. That is the highest capacity in the Anden dehumidifier lineup, sized for the largest single-room grow facilities.

What does the included Model A77 controller do?

The Model A77 is a wall-mounted digital controller included with the A710V1. It provides remote humidity setpoint management, real-time readings, and diagnostic access without requiring physical access to the unit.

Why is variable-speed operation more efficient than fixed-speed?

A fixed-speed unit runs at the same output regardless of actual moisture load, which wastes energy during lower-demand periods. The A710V1's variable-speed operation is what delivers its 3.0 L/kWh energy factor, the highest in the Anden lineup.