Anden A320V3 Industrial Grade Dehumidifier — 320 Pints/Day 277V MERV 11

320 Pints Per Day on 277V Power — Industrial Cultivation Dehumidification for Commercial Facilities

Commercial grow facilities built in large industrial or commercial buildings are frequently wired with 277V single-phase power on lighting circuits — a voltage that standard 120VAC and 208/240VAC dehumidifiers cannot use. The Anden A320V3 Industrial Grade Dehumidifier is engineered specifically for 277V environments, removing up to 320 pints of moisture per day at up to 830 CFM while delivering 2.5 liters per kilowatt hour in energy efficiency — giving facilities wired with 277V lighting circuits access to industrial-scale dehumidification without requiring separate power infrastructure.

The A320V3 includes the Model A77 remote controller as standard, enabling humidity setpoint management, real-time environmental monitoring, and diagnostic access from a wall-mounted controller rather than from the unit itself. Smart control integration connects the A320V3 to environmental management platforms for automated, data-driven humidity control that maintains target VPD ranges through all growth stages. Overflow protection provides a safety layer against drain blockage during unattended operation, and the positive pressure drain enables flexible condensate routing regardless of unit mounting height.

Four installation configurations — suspended, freestanding, ducted, and hardwired — give facility engineers the flexibility to integrate the A320V3 into a wide range of commercial grow room layouts. MERV 11 filtration protects crops and equipment, and a 5-year warranty backs the system for long-term commercial use.

Key Features & Benefits

• 320 Pints/Day at Up to 830 CFM on 277V — The only way to achieve industrial-scale dehumidification at this capacity in 277V-wired facilities without requiring a separate power circuit or voltage transformer.
• 2.5 L/kWh Energy Efficiency — Removes 2.5 liters of moisture for every kilowatt hour consumed, delivering cost-effective operation at the high daily hours of use that commercial cultivation requires.
• Model A77 Remote Controller Included — Digital wall controller provides remote humidity management, real-time readings, and diagnostic access — essential for units installed overhead, in mechanical rooms, or otherwise out of easy reach.
• Smart Control Integration — Automates humidity response based on continuous environmental monitoring, eliminating manual setpoint management and keeping VPD in target range through every phase of the grow cycle.
• Overflow Protection — Shuts the unit down automatically if condensate drainage becomes blocked, preventing water damage during unattended operation in commercial facilities.
• Four Installation Modes — Suspended, freestanding, ducted, or hardwired configurations adapt to the layout requirements of large commercial grow facilities with fixed electrical infrastructure.
• MERV 11 Filter + 5-Year Warranty — Crop-protective filtration and Anden's standard 5-year commercial warranty for continuous cultivation use.

Who Should Use the Anden A320V3

The A320V3 is designed for commercial indoor grow operations housed in large commercial or industrial buildings where the electrical infrastructure runs on 277V single-phase power — typically facilities that share electrical systems with commercial lighting or HVAC infrastructure wired at this voltage. It is the direct functional equivalent of the A320V1 for 277V environments, providing identical capacity and performance for facilities where the alternative would be installing a step-down transformer or running separate 208/240V circuits.

Product Specifications

Capacity: 320 Pints/Day. Airflow: Up to 830 CFM. Voltage: 277V. Phase: Single. Energy Factor: 2.5 L/kWh. Filter: MERV 11 self-sealing. Includes: Model A77 remote controller. Features: Smart control integration, overflow protection, positive pressure drain, VPD monitoring. Warranty: 5-Year. Manufacturer: Therma-Stor LLC (Anden).

Frequently Asked Questions

What is 277V power and is it common in commercial facilities?

277V single-phase power is a standard voltage in North American commercial and industrial buildings, derived from a 480V three-phase distribution system. It is the most common voltage used for commercial fluorescent and LED lighting circuits in warehouses, office buildings, and large retail spaces. Many indoor grow facilities operating in converted commercial buildings already have 277V circuits available from the building's existing lighting infrastructure, making the A320V3 a practical choice for these environments without requiring new electrical service.

Is the A320V3 functionally identical to the A320V1?

Yes. The A320V3 and A320V1 provide equivalent moisture removal capacity (320 pints/day), airflow (up to 830 CFM), and feature sets — including the A77 controller, smart control integration, and overflow protection. The only difference is operating voltage: the V1 runs on 208/240VAC and the V3 runs on 277V. Choose based on the voltage available at your facility's dehumidifier circuit.

What filter does the A320V3 use?

The A320V3 uses the same Anden MERV 11 Air Filter as the A320V1 — model #5813, measuring 20in x 22in x 2in. The filter is the same across both voltage variants of the 320-series. Replace when visibly loaded or when airflow decreases noticeably.

Can the A320V3 be connected to a Growlink or similar environmental controller?

Yes. The A320V3 supports smart control integration, allowing connection to Growlink, TrolMaster, and other compatible environmental management platforms. Integration enables automated humidity response based on real-time VPD data from canopy-level sensors. Refer to the A320V3 installation manual and your controller documentation for specific wiring requirements.