240V CO2 Device Station with cable set

Automate Standard CO2 Equipment, Universal 100-240V

TrolMaster's CO2 device stations connect standard supplemental CO2 equipment, such as a CO2 generator or an exhaust-linked CO2 control, to the Hydro-X system so that equipment runs on the same automated schedule as the rest of a grow room's climate hardware. Each station self-assigns its own address on the Hydro-X network the moment it's plugged in, with no manual configuration step required.

This universal-voltage version accepts 100 to 240 VAC at 50 or 60 Hz, so it handles CO2 equipment built to either North American or international electrical standards, up to 10 amps.

Key Features & Benefits

• LED Status Indicator — shows at a glance whether the connected CO2 equipment is currently active.
• Plug-and-Play Address Assignment — self-identifies on the Hydro-X network with no manual configuration.
• Cable Set Included — ships with a 16 ft and 4 ft RJ12 cable plus a T-splitter for installation.
• Rated for Standard CO2 Equipment — controls CO2 generators or exhaust-linked CO2 controls up to 10 amps.

Who Should Use a TrolMaster CO2 Device Station

Hydro-X system owners running supplemental CO2 equipment, whether a CO2 generator or an exhaust-tied CO2 control, need one of these stations to bring that equipment onto the same automated schedule as their lighting and climate hardware. Facilities mixing regional voltage standards should confirm which version matches the equipment being connected before ordering.

About TrolMaster

TrolMaster's device stations, including its CO2 stations, plug into the modular Hydro-X controller lineup the Sacramento, California company engineers so growers add only the equipment types their room actually uses. That approach keeps a single-zone build from turning into a stack of separate, unconnected timers and relays.

Frequently Asked Questions

What kind of CO2 equipment can this station control?

It controls standard supplemental CO2 equipment, including CO2 generators and exhaust-linked CO2 controls, up to 10 amps. It does not replace a dedicated CO2 safety monitor for occupied spaces.

Does the station need manual address setup?

No, it self-assigns its address on the Hydro-X network as soon as it's connected. No configuration step is required before it starts reporting.

What comes included with the station?

Each station ships with a 16 ft RJ12 cable, a 4 ft RJ12 cable, and a T-splitter. Those cables are enough to connect it directly into an existing Hydro-X chain.

How do I know the station is working?

An LED indicator on the unit shows whether the connected CO2 equipment is currently active. That gives a quick visual check without opening the Hydro-X app.