Small Electrical Wire Tap - 3.5 x 2 x 2-in

Branch Off a Main Line Without Cutting It - 3.5 in Long

Adding a branch circuit to power lights, pumps, or fans in a grow space can mean cutting and splicing a main wire. A wire tap connects a tap wire to the main line in place. This tap takes main wire from No. 1 to 300 MCM and tap wire from No. 6 to No. 2, with a nominal current of 157 amps.

At 3.5 x 2 x 2 in and 0.3 lb shipping weight, this single unit suits home growers adding one branch, as well as facilities that need a few taps for equipment runs. Larger projects can order more units as needed.

Key Features & Benefits

• Wide main line range — fits main wire from No. 1 to 300 MCM, so one part covers many feeder sizes.
• Tap line range of No. 6 to No. 2 — suits common branch wire sizes for equipment circuits.
• 157 amp nominal current — gives a clear figure to compare against your load.
• Puncture depth of 1.5 to 2.5 mm — defines how the connector bites into the conductor.
• Compact body — 3.5 x 2 x 2 in fits tighter enclosures and wire runs.

Who Should Use the Small Electrical Wire Tap

Use it if you are extending power to cultivation equipment such as lighting, ventilation, or hydroponic system pumps and want to tap an existing main line. Have a qualified electrician confirm wire sizes, load, and local code compliance before installing.

About the Small Electrical Wire Tap

This is a small electrical tap sold as a single unit. It accepts main line wire from No. 1 to 300 MCM and tap line wire from No. 6 to No. 2, with a nominal current of 157 amps and a puncture depth of 1.5 to 2.5 mm. It measures 3.5 x 2 x 2 in.

Frequently Asked Questions

Q: What wire sizes does this tap accept?
A: The main line side accepts No. 1 to 300 MCM wire. The tap line side accepts No. 6 to No. 2 wire.

Q: What is the nominal current?
A: The nominal current is 157 amps. Check that your circuit load stays within this figure and within local code.

Q: Why use a tap instead of splicing the main line?
A: A tap connects a branch wire to the main line without cutting the main run. That can save time when adding a circuit to existing wiring.

Q: What does puncture depth mean?
A: Puncture depth is how far the connector's contact penetrates toward the conductor. For this tap it is 1.5 to 2.5 mm.

Q: How big is it?
A: It measures 3.5 x 2 x 2 in and ships at 0.3 lb. Confirm it fits your enclosure or wire path before ordering.

Q: Do I need an electrician?
A: Electrical work should follow local code, and a qualified electrician should confirm sizing and installation for your setup.