Bluelab Pump and Cassette replacement for pH Controller - 10 ml/min

Restore pH Dosing on Your 10 ml pH Controller, Pump Assembly

When the pump on a pH Controller fails, pH correction stops and the reservoir drifts. This assembly replaces both pump and cassette for Bluelab pH Controllers that use a 10 ml per minute pump.

It suits owners keeping an existing pH Controller in service. Controllers with a 120 ml per minute pump, such as the pH Controller Wi-Fi, use PUMPCONT-M instead.

Key Features & Benefits

• Pump and cassette — complete replacement assembly.
• 10 ml per minute — matches pH Controllers fitted with the 10 ml pump.
• Repair, not replace — keeps an existing controller in service.

Who Should Use this pump assembly

Owners of a Bluelab pH Controller fitted with a 10 ml per minute pump. Confirm your controller's pump rating before ordering.

About Bluelab 10 ml Pump Assembly

Bluelab supplies replacement pumps and cassettes so controllers can be repaired. Bluelab's small/medium cassette (PUMPCASS-SM) is listed for 10 ml to 120 ml pumps, including the original pH Controller.

Frequently Asked Questions

Which controllers use the 10 ml pump?

This assembly is listed for the Bluelab pH Controller with a 10 ml per minute pump. Check the pump rating on your unit or in its manual before ordering.

Pump assembly or cassette only?

If the motor runs but flow is low, try a new cassette first (PUMPCASS-SM suits 10 ml to 120 ml pumps). Replace the full assembly if the pump does not run or is damaged.

What if my controller has a 120 ml pump?

Use the PUMPCONT-M assembly, which is listed for the pH Controller Wi-Fi and PeriPod M3 and M4.

Why does pump size matter?

Pump flow rate determines how much pH adjuster is delivered per dose. Fitting the wrong size changes dosing behavior, so match the original rating.