Bluelab Pump and Cassette replacement for Peripod L3 - 1200 ml/min

Complete Pump Replacement for PeriPod L3 Dosers, 1200 ml/min

When a doser's pump fails, a new cassette alone will not restore dosing. This assembly replaces both pump and cassette on the Bluelab PeriPod L3. It brings the doser back to its rated 1200 ml per minute output.

Commercial operations relying on L3 dosing can keep one on hand to restore a failed pump quickly.

Key Features & Benefits

• Pump and cassette — complete replacement assembly.
• Made for the PeriPod L3 — fits PERIPODL3 dosers.
• 1200 ml per minute — matches the L3's 40.6 fl oz per minute rating.

Who Should Use this pump assembly

Owners of the Bluelab PeriPod L3 whose pump has failed. If only the cassette is worn, PUMPCASS-L is the lower-cost fix.

About Bluelab PeriPod L3 Pump Assembly

Bluelab supplies replacement pumps and cassettes for its PeriPod dosers so systems can be repaired rather than replaced.

Frequently Asked Questions

Pump assembly or cassette only?

If the pump motor runs but flow is low, a worn cassette (PUMPCASS-L) is usually the fix. If the pump does not run or is damaged, replace the full pump and cassette assembly.

Which doser does it fit?

It fits the Bluelab PeriPod L3 (PERIPODL3), the 1200 ml per minute model.

Do I need to recalibrate after replacement?

The PeriPod has a pump calibration feature. Calibrating after a pump swap matches the new pump to the viscosity of the nutrient it doses.

Does this fit the PeriPod M3 or M4?

No. M-series dosers use the PUMPCONT-M assembly rated at 120 ml per minute.