Bluelab Pro Controller Wi-Fi

Automate pH and Multi-Part Nutrient Dosing, Up to 12 Pumps

Holding pH and nutrient strength steady in a busy reservoir takes constant checking and manual dosing. The Pro Controller Wi-Fi measures pH, conductivity and temperature and drives Bluelab PeriPod dosers to correct both automatically. Link PeriPods to dose multi-part nutrient schedules and pH up or down from one controller.

It is built for commercial reservoirs and advanced home systems that run multi-part feeds. Add PeriPod M3, M4 or L3 dosers to match your reservoir size, and the External Lockout and Alarm Box for float switch protection.

Key Features & Benefits

• Full dosing control — automates pH and nutrient dosing with Bluelab PeriPod M3, M4 or L3 dosers.
• Multi-part nutrients — link PeriPods for complex schedules, up to 12 pumps.
• Safety lockouts and alarms — prevent excessive dosing; dosing auto-resumes after power loss.
• Edenic connection — built-in Wi-Fi (can be disabled) for real-time monitoring, control and alerts.
• Replaceable probes — pH (BNC), temperature and conductivity probes on 2 m / 6 ft cables.

Who Should Use the Pro Controller Wi-Fi

Commercial growers and advanced home growers running recirculating or batch-fed reservoirs who want automated pH and nutrient control. It is the core of a Bluelab PeriPod dosing system.

About Bluelab Pro Controller Wi-Fi

The Pro Controller Wi-Fi includes conductivity, pH and temperature probes, a probe holder, an External Lockout and Alarm Cable and calibration sachets. It runs on a 100–240 VAC international power supply and carries a 2-year limited warranty (6 months on the pH probe). PeriPod dosers are sold separately.

Frequently Asked Questions

Does the Pro Controller dose on its own?

No. The Pro Controller measures and controls, while Bluelab PeriPod dosers do the pumping. Pair it with PeriPod M3, M4 or L3 units, sold separately.

How many nutrients can it dose?

Linked PeriPods support up to 12 pumps, so you can dose multi-part nutrient schedules plus pH adjusters. Individual nutrient ratios are set in the Edenic app. PeriPod M-series and L-series units cannot be combined on one system.

What dosing settings can I adjust?

On-time dosing is settable from 1 to 10 minutes, and off-time from 0 to 59 minutes 50 seconds. This lets the reservoir mix between doses.

What happens if power is lost?

Dosing resumes automatically after power returns, and alarm settings are retained. Safety lockouts stop dosing if readings go beyond limits you set.

What do I need for remote access?

Built-in Wi-Fi connects the controller to the Edenic app, which needs an Android (8.0 or later) or iOS (12 or later) phone. An internet connection is required for remote access and data logging.