Save 3%
CenturionPro HP1 Bucker
HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in the industry’s highest buck rate per hour.
The HP1 comes with a bucker stand and table-top set-up legs included for added value and versatility. With 5-hole sizes, the HP1 accepts wet or dry stems up to 3/4” and can buck up to 175 pounds (up to 35 lbs/hr dry) per hour, replacing 5-7 human workers. When combined with the high productivity of the CenturionPro trimming machines, you’ll get the highest capacity harvesting system in the world! The HP1 comes complete with a 0.75 HP gear driven motor with variable speeds to provide unsurpassed power and adjustability. Thanks to the variable speed controls, both wet and dry products can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP1 plugs into a 110-volt, 15-amp circuit – EU/AUS Compatible. Backed by a 5 years warranty. The HP1 bucker is simple, powerful, and effective and will process product at an unprecedented rate.
The bucker stand comes standard with industrial casters.
SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 2.5A Operating
Dimensions: 32.5″ L x 37″ W x 59″ H
Weight: 198 lbs | 90 kg
Drive Motor: 0.75 hp, IP54 | 1690 RPM
Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V
Human Worker Replacement: 5-7 people
Feed Rate: Wet: up to 175 lbs/hr | Dry: up to 35 lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s
Pull Strength: > 400 lbs
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 5 years
HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in the industry’s highest buck rate per hour.
The HP1 comes with a bucker stand and table-top set-up legs included for added value and versatility. With 5-hole sizes, the HP1 accepts wet or dry stems up to 3/4” and can buck up to 175 pounds (up to 35 lbs/hr dry) per hour, replacing 5-7 human workers. When combined with the high productivity of the CenturionPro trimming machines, you’ll get the highest capacity harvesting system in the world! The HP1 comes complete with a 0.75 HP gear driven motor with variable speeds to provide unsurpassed power and adjustability. Thanks to the variable speed controls, both wet and dry products can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP1 plugs into a 110-volt, 15-amp circuit – EU/AUS Compatible. Backed by a 5 years warranty. The HP1 bucker is simple, powerful, and effective and will process product at an unprecedented rate.
The bucker stand comes standard with industrial casters.
SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 2.5A Operating
Dimensions: 32.5″ L x 37″ W x 59″ H
Weight: 198 lbs | 90 kg
Drive Motor: 0.75 hp, IP54 | 1690 RPM
Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V
Human Worker Replacement: 5-7 people
Feed Rate: Wet: up to 175 lbs/hr | Dry: up to 35 lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s
Pull Strength: > 400 lbs
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 5 years
No reviews found
Please sign in so that we can notify you about a reply
